Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Fiberglassing my kayak
By:Bill Hamm
Date: 12/4/2012, 12:34 am
In Response To: Re: Epoxy: Fiberglassing my kayak (Al Edie)

: I might have avoided smell in the house from the epoxy but I
: finished the kayak with two part polyurethane which is a more
: serious issue. With the fans I didn't smell a hint of it
: elsewhere in the house, and it is powerfully smelly stuff. I
: have on other occasions used solvents in the same part of the
: basement, and received complaints from the other half about
: smell elsewhere, so I know that in our house the two part
: polyurethane application to a kayak would have been a serious
: problem without the fans.

: more or less on the topic of applying smelly stuff in the house,
: for breathing during application of the polyurethane, I hooked
: up a respirator to a plastic pipe normally used for sump pumps,
: and put the intake end outside the house through a second
: window. A normal organic vapor cartridge hardly touches the odor
: from the that stuff. The plastic pipe was a bit of a pain to
: drag around during the work, but it did the job if somewhat
: inconveniently. If I do another kayak with this finish, I will
: rig up a pressurized air supply, likely using a hydroponic air
: pump. That way, a small diameter air tube can be used which
: would be more easily moved about. OTOH, one could just buy a
: supplied air respirator system, but they are expensive.

: AE

Hi Al,

If you've not seen it, might check out the Hobby Air system: http://ecx.images-amazon.com/images/I/31Ktlx117GL._SL500_AA300_.jpg

It's a bunch less money than the average supplied air respirator system.

Bill H.

Messages In This Thread

Epoxy: Fiberglassing my kayak
Jack Hawkins -- 11/28/2012, 3:13 pm
Re: Epoxy: Fiberglassing my kayak
JohnAbercrombie -- 11/28/2012, 3:25 pm
Re: Epoxy: Fiberglassing my kayak
Jeff Horton -- 11/28/2012, 3:43 pm
Re: Epoxy: Fiberglassing my kayak
Mark Rakestraw -- 11/28/2012, 3:46 pm
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 11/29/2012, 12:57 am
Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/2/2012, 11:35 am
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/3/2012, 12:27 am
Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/3/2012, 8:49 pm
Re: Epoxy: Fiberglassing my kayak
Marc Upchurch -- 12/3/2012, 10:21 pm
Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/4/2012, 12:15 pm
Re: Epoxy: Fiberglassing my kayak
JohnAbercrombie -- 12/3/2012, 11:08 pm
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/4/2012, 12:35 am
Re: Epoxy: Fiberglassing my kayak
JohnAbercrombie -- 12/4/2012, 3:18 am
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/5/2012, 2:13 am
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/4/2012, 12:34 am
Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/4/2012, 12:11 pm
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/5/2012, 2:10 am
Re: Epoxy: Fiberglassing my kayak
Malcolm Schweizer -- 11/28/2012, 7:32 pm
Re: Epoxy: Fiberglassing my kayak
Jack Hawkins -- 11/28/2012, 7:41 pm
Most excellent advice, Malcolm
Robert N Pruden -- 11/30/2012, 12:21 pm
Re: Epoxy: Fiberglassing my kayak
Marc Upchurch -- 11/28/2012, 8:39 pm
Re: Epoxy: Fiberglassing my kayak
Chris -- 11/28/2012, 9:00 pm
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 11/29/2012, 12:55 am
Re: Epoxy: Fiberglassing my kayak
Robert N Pruden -- 11/29/2012, 8:58 pm
Re: Epoxy: Fiberglassing my kayak
Jack Hawkins -- 12/1/2012, 12:48 pm