Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Fiberglassing my kayak
By:Bill Hamm
Date: 12/5/2012, 2:13 am
In Response To: Re: Epoxy: Fiberglassing my kayak (JohnAbercrombie)

: Bill-
: I think you may be thinking of the Imron/Awlgrip family of LPUs?

: It's always a good idea to check the MSDS for the products you are
: using:
:
: http://datasheets.international-coatings.com/msds/YHS299_usa_eng_E1.pdf

: And generally, if you have good suction on the mask (when you block
: the inlets) and fresh (correct type) cartridges, the lack of
: odour can be a good indication that not much of the nasty stuff
: is getting through.

: Probably better to farm this work out to an autobody guy if you
: have any doubts.....

Sounds better than most of these products, it's not just Imron btw that's bad. There is a note that it might cause cancer, probably a bad thing to breath regardless. Not all solvents are able to be filtered, definately worth checking the MSDS sheets.

Bill H.

Messages In This Thread

Epoxy: Fiberglassing my kayak
Jack Hawkins -- 11/28/2012, 3:13 pm
Re: Epoxy: Fiberglassing my kayak
JohnAbercrombie -- 11/28/2012, 3:25 pm
Re: Epoxy: Fiberglassing my kayak
Jeff Horton -- 11/28/2012, 3:43 pm
Re: Epoxy: Fiberglassing my kayak
Mark Rakestraw -- 11/28/2012, 3:46 pm
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 11/29/2012, 12:57 am
Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/2/2012, 11:35 am
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/3/2012, 12:27 am
Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/3/2012, 8:49 pm
Re: Epoxy: Fiberglassing my kayak
Marc Upchurch -- 12/3/2012, 10:21 pm
Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/4/2012, 12:15 pm
Re: Epoxy: Fiberglassing my kayak
JohnAbercrombie -- 12/3/2012, 11:08 pm
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/4/2012, 12:35 am
Re: Epoxy: Fiberglassing my kayak
JohnAbercrombie -- 12/4/2012, 3:18 am
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/5/2012, 2:13 am
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/4/2012, 12:34 am
Re: Epoxy: Fiberglassing my kayak
Al Edie -- 12/4/2012, 12:11 pm
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 12/5/2012, 2:10 am
Re: Epoxy: Fiberglassing my kayak
Malcolm Schweizer -- 11/28/2012, 7:32 pm
Re: Epoxy: Fiberglassing my kayak
Jack Hawkins -- 11/28/2012, 7:41 pm
Most excellent advice, Malcolm
Robert N Pruden -- 11/30/2012, 12:21 pm
Re: Epoxy: Fiberglassing my kayak
Marc Upchurch -- 11/28/2012, 8:39 pm
Re: Epoxy: Fiberglassing my kayak
Chris -- 11/28/2012, 9:00 pm
Re: Epoxy: Fiberglassing my kayak
Bill Hamm -- 11/29/2012, 12:55 am
Re: Epoxy: Fiberglassing my kayak
Robert N Pruden -- 11/29/2012, 8:58 pm
Re: Epoxy: Fiberglassing my kayak
Jack Hawkins -- 12/1/2012, 12:48 pm