I have never done it with a skill saw but a long fence is totally opposite of what you want. You want a short fence.
Look at it this way: imagine cutting strips with a band saw and a curved piece of wood. if you had a small bearing pressing the wood in right at the point of contact with the blade, you could cut nice evenly thick strips. Your long fence will bridge across any warps and make thin strips.
I too have ruined wood using a long fence on my table saw. Fortunately I caught it after 4 strips. I now use a short fence that ends at the end of the blade. I don't care what the board does after it passes the blade.
The other thing you can do is snap a string line and true up the board edge with a plane.
Messages In This Thread
- Strip: Problem Cutting strips
Thor -- 1/14/2013, 9:53 pm- Re: Strip: Problem Cutting strips
ancient kayaker -- 1/14/2013, 11:14 pm- Re: Strip: Problem Cutting strips
John Abercrombie -- 1/14/2013, 11:19 pm- Re: Strip: Problem Cutting strips
Allan -- 1/15/2013, 12:10 am- Re: Strip: Problem Cutting strips
Thor -- 1/15/2013, 2:49 pm- Re: Strip: Problem Cutting strips
Malcolm Schweizer -- 1/16/2013, 8:47 am
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips
Nick Riccardi -- 1/15/2013, 7:36 am- Re: Strip: Problem Cutting strips
Todd Olson -- 1/15/2013, 3:58 pm
- Re: Strip: Problem Cutting strips
Kevin -- 1/15/2013, 7:15 pm- Re: Strip: Problem Cutting strips
Ken Blanton -- 1/15/2013, 8:51 pm- Re: Strip: Problem Cutting strips *PIC*
Jay Babina -- 1/16/2013, 4:08 pm- Re: Strip: Problem Cutting strips
Etienne Muller -- 1/16/2013, 5:02 pm- Re: Strip: Problem Cutting strips
Bill Hamm -- 1/17/2013, 12:50 am
- Re: Strip: Problem Cutting strips
Thor -- 1/16/2013, 5:25 pm- Re: Strip: Problem Cutting strips
ancient kayaker -- 1/16/2013, 6:10 pm- Re: Strip: Problem Cutting strips
Allan -- 1/16/2013, 6:17 pm- Re: Strip: Problem Cutting strips
Bill Hamm -- 1/17/2013, 12:53 am- Re: Strip: Problem Cutting strips
John Abercrombie -- 1/17/2013, 1:51 am- Re: Strip: Problem Cutting strips
Etienne Muller -- 1/17/2013, 4:22 am- Re: Strip: Problem Cutting strips
Tom Thomas -- 1/17/2013, 8:44 am- Re: Strip: Problem Cutting strips *PIC*
John Abercrombie -- 1/17/2013, 12:05 pm- Re: Strip: Problem Cutting strips
Mike Savage -- 1/17/2013, 12:48 pm- Re: Strip: Problem Cutting strips
John Abercrombie -- 1/17/2013, 1:49 pm- Re: Strip: Problem Cutting strips
Mike Savage -- 1/18/2013, 2:19 pm
- Re: Strip: Problem Cutting strips
John Abercrombie -- 1/17/2013, 1:53 pm- Re: Strip: Problem Cutting strips
Mike Savage -- 1/18/2013, 2:24 pm- Re: Strip: Problem Cutting strips
Bill Hamm -- 1/19/2013, 12:52 am- Re: Strip: Problem Cutting strips *PIC*
Rob Macks/Laughing Loon CC&K -- 1/19/2013, 9:03 am
- Re: Strip: Problem Cutting strips *PIC*
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips
ancient kayaker -- 1/17/2013, 2:30 pm - Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips
John Abercrombie -- 1/17/2013, 11:44 am- Re: Strip: Problem Cutting strips
Bill Hamm -- 1/19/2013, 12:45 am- Re: Strip: Problem Cutting strips
Etienne Muller -- 1/19/2013, 4:24 am- Re: Strip: Problem Cutting strips
Bill Hamm -- 1/19/2013, 4:50 am- Re: Strip: Problem Cutting strips
Etienne Muller -- 1/19/2013, 10:46 am
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips *PIC*
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips *PIC*
Rob Macks/Laughing Loon CC&K -- 1/17/2013, 3:51 pm- Re: Strip: Problem Cutting strips
John Abercrombie -- 1/17/2013, 4:28 pm- Re: Strip: Problem Cutting strips
Bill Hamm -- 1/19/2013, 12:56 am- Re: Strip: Problem Cutting strips
ancient kayaker -- 1/19/2013, 10:55 am
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips
PatrickC -- 1/17/2013, 7:17 pm- Re: Strip: Problem Cutting strips
John Abercrombie -- 1/17/2013, 8:07 pm- Re: Strip: Problem Cutting strips *PIC*
ancient kayaker -- 1/17/2013, 11:31 pm
- Re: Strip: Problem Cutting strips *PIC*
- Re: Strip: Problem Cutting strips
Etienne Muller -- 1/19/2013, 12:16 pm- Re: Strip: Problem Cutting strips
John Abercrombie -- 1/19/2013, 8:36 pm- Re: Strip: Problem Cutting strips
Robert Horstmann -- 1/19/2013, 10:08 pm
- Re: Strip: Problem Cutting strips
Tom Thomas -- 1/19/2013, 10:54 pm- Re: Strip: Problem Cutting strips
Etienne Muller -- 1/20/2013, 4:32 am
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips
- Re: Strip: Problem Cutting strips