Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: First fiberglass
By:dave g
Date: 3/28/2013, 10:59 pm
In Response To: Re: Strip: First fiberglass (dave g)

Also helps to use a guide coat, like 3m makes in order to dirty the surface, then when you sand you can see it becoming clean and know to keep moving. Only sand until the guide coat is virtually gone, then re- apply the guide coat and go to the next grit.

Dave g

Messages In This Thread

Strip: First fiberglass *PIC*
Thor -- 3/18/2013, 8:44 pm
Re: Strip: First fiberglass
Robert Horstmann -- 3/19/2013, 1:28 am
Re: Strip: First fiberglass
Etienne Muller -- 3/19/2013, 5:13 am
Re: Strip: First fiberglass
Dan Caouette (CSCWC) -- 3/19/2013, 5:54 am
Re: Strip: First fiberglass
Thor -- 3/19/2013, 8:28 pm
Re: Strip: First fiberglass
Bill Hamm -- 3/20/2013, 1:39 am
Re: Strip: First fiberglass
Etienne Muller -- 3/20/2013, 5:12 am
Re: Strip: First fiberglass
Dan Caouette (CSCWC) -- 3/20/2013, 9:26 am
Re: Strip: First fiberglass
robert l -- 3/19/2013, 11:17 am
Re: Strip: First fiberglass
Etienne Muller -- 3/19/2013, 6:26 pm
Re: Strip: First fiberglass
robert l -- 3/20/2013, 1:44 am
Re: Strip: First fiberglass *PIC*
Etienne Muller -- 3/20/2013, 5:48 am
Re: Strip: First fiberglass
JohnAbercrombie -- 3/20/2013, 12:11 pm
Re: Strip: First fiberglass *PIC*
Thor -- 3/28/2013, 10:08 pm
Re: Strip: First fiberglass
dave g -- 3/28/2013, 10:56 pm
Re: Strip: First fiberglass
dave g -- 3/28/2013, 10:59 pm
Re: Strip: First fiberglass
Thor -- 3/19/2013, 8:19 pm
Re: Strip: First fiberglass
Kevin -- 3/19/2013, 9:57 pm