Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Dry Spot in my glassing
By:Bill Hamm
Date: 4/22/2013, 1:04 am
In Response To: Re: Epoxy: Dry Spot in my glassing (Mark Vander Horck)

Try using a brush, easier to work the epoxy into the glass with one and lots easier to get the air back thru the tight weave. A cheap 2" chip brush works fine. Might want an extra (or two, they are cheap) with the bristles cut in half makes them stiffer.

Bill H.

Messages In This Thread

Epoxy: Dry Spot in my glassing
Mark Vander Horck -- 4/20/2013, 11:39 am
Re: Epoxy: Dry Spot in my glassing
JohnAbercrombie -- 4/20/2013, 12:29 pm
Re: Epoxy: Dry Spot in my glassing
Mark Vander Horck -- 4/20/2013, 1:04 pm
Re: Epoxy: Dry Spot in my glassing
JohnAbercrombie -- 4/20/2013, 2:30 pm
Re: Epoxy: Dry Spot in my glassing
Mark Vander Horck -- 4/20/2013, 3:13 pm
Re: Epoxy: Dry Spot in my glassing
Nick Riccardi -- 4/21/2013, 9:13 am
Re: Epoxy: Dry Spot in my glassing
JohnAbercrombie -- 4/21/2013, 11:43 am
Re: Epoxy: Dry Spot in my glassing
Mark Vander Horck -- 4/21/2013, 10:35 pm
Re: Epoxy: Dry Spot in my glassing
Allan -- 4/22/2013, 12:54 am
Re: Epoxy: Dry Spot in my glassing
Mark Vander Horck -- 4/22/2013, 12:00 pm
Re: Epoxy: Dry Spot in my glassing
Bill Hamm -- 4/22/2013, 1:04 am
Re: Epoxy: Dry Spot in my glassing
Mark Vander Horck -- 4/22/2013, 11:58 am