Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: First strip idea
By:Matt Jakubek
Date: 4/24/2013, 10:24 am
In Response To: Re: Strip: First strip idea (Bill Hamm)

And...no one has even mentioned better resins with post curing. Can get much higher strengths if you have the available cash.

Though post curing resins can be cheaper that the high tech fabrics, they both work together better.

Bill H.

Post curing (or even using prepregs) is a different story and will need quite a different workshop setup, including a 20ft oven ;-)
I think I mentioned the sicomin resins I was using back in Germany - the stuff I used needed a post cure at 80°C which was still feasible with a diy setup (and it greatly improved stiffness).
I'm aware that West, System three and all those others most of us use aren't quite up to date but for me this is what I can get here in Canada without having to order a whole barrel…

Messages In This Thread

Strip: First strip idea *PIC*
Matt Jakubek -- 4/22/2013, 11:57 am
Re: Strip: First strip idea
JohnAbercrombie -- 4/22/2013, 12:58 pm
Re: Strip: First strip idea
Matt Jakubek -- 4/22/2013, 1:23 pm
Re: Strip: First strip idea
JohnAbercrombie -- 4/22/2013, 1:14 pm
Re: Strip: First strip idea
Matt Jakubek -- 4/22/2013, 1:32 pm
Re: Strip: First strip idea
JohnAbercrombie -- 4/22/2013, 4:17 pm
Re: Strip: First strip idea *PIC*
Robert l -- 4/23/2013, 10:25 am
Re: Strip: First strip idea
Matt Jakubek -- 4/23/2013, 11:06 am
Re: Strip: First strip idea
JohnAbercrombie -- 4/23/2013, 12:43 pm
Re: Strip: First strip idea
Matt Jakubek -- 4/23/2013, 1:16 pm
Re: Strip: First strip idea
JohnAbercrombie -- 4/23/2013, 2:35 pm
Re: Strip: First strip idea
Dan Caouette (CSCWC) -- 4/23/2013, 11:25 am
Re: Strip: First strip idea
Robert Horstmann -- 4/23/2013, 12:22 pm
Re: Strip: First strip idea
Matt Jakubek -- 4/23/2013, 12:27 pm
Re: Strip: First strip idea
Dan Caouette (CSCWC) -- 4/23/2013, 12:29 pm
Re: Strip: First strip idea
Robert Horstmann -- 4/23/2013, 12:40 pm
Re: Strip: First strip idea
Dan Caouette (CSCWC) -- 4/23/2013, 12:59 pm
Re: Strip: First strip idea
Bill Hamm -- 4/24/2013, 1:19 am
Re: Strip: First strip idea
Matt Jakubek -- 4/24/2013, 10:24 am
Re: Strip: First strip idea
Bill Hamm -- 4/28/2013, 1:16 am
Re: Strip: First strip idea
Justin -- 4/30/2013, 3:35 am
Re: Strip: First strip idea
Bill Hamm -- 4/24/2013, 1:17 am
Re: Strip: First strip idea
Matt Jakubek -- 4/23/2013, 12:24 pm
Re: Strip: First strip idea *PIC*
Dan Caouette (CSCWC) -- 4/23/2013, 12:47 pm
Re: Strip: First strip idea
Bill Hamm -- 4/24/2013, 1:22 am
Re: Strip: First strip idea
JohnAbercrombie -- 4/23/2013, 12:49 pm
Re: Strip: First strip idea
Dan Caouette (CSCWC) -- 4/23/2013, 1:07 pm
Re: Strip: First strip idea
JohnAbercrombie -- 4/23/2013, 2:33 pm
Re: Strip: First strip idea
Bill Hamm -- 4/24/2013, 1:25 am
Re: Strip: First strip idea
Malcolm Schweizer -- 4/22/2013, 2:11 pm
Re: Strip: First strip idea
Matt Jakubek -- 4/22/2013, 2:35 pm
Re: Strip: First strip idea
Paul Davies -- 4/22/2013, 2:44 pm
Re: Strip: First strip idea
JohnAbercrombie -- 4/22/2013, 4:21 pm
Re: Strip: First strip idea
Matt Jakubek -- 4/22/2013, 4:38 pm
Re: Strip: First strip idea
Robert l -- 4/22/2013, 3:33 pm
Re: Strip: First strip idea
Marc Upchurch -- 4/22/2013, 10:58 pm
Re: Strip: First strip idea
Matt Jakubek -- 4/22/2013, 11:09 pm
Re: Strip: First strip idea
Marc Upchurch -- 4/23/2013, 8:14 am
Re: Strip: First strip idea
Robert Horstmann -- 4/23/2013, 11:52 am
Re: Strip: First strip idea
Matt Jakubek -- 4/23/2013, 11:54 am
Re: Strip: First strip idea
Robert Horstmann -- 4/23/2013, 12:11 pm
Re: Strip: First strip idea
Bill Hamm -- 4/24/2013, 1:29 am
Re: Strip: First strip idea
Bill Hamm -- 4/24/2013, 1:38 am
Re: Strip: First strip idea
Matt Jakubek -- 4/24/2013, 9:08 am
Re: Strip: First strip idea
Robert Horstmann -- 4/24/2013, 12:05 pm
Re: Strip: First strip idea
Etienne Muller -- 4/24/2013, 1:26 pm
Re: Strip: First strip idea
Robert Horstmann -- 4/24/2013, 1:36 pm
Re: Strip: First strip idea
Matt Jakubek -- 5/27/2013, 11:47 am