Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: questions on building Njord
By:Oliver
Date: 10/27/2013, 4:55 pm
In Response To: Re: Strip: questions on building Njord (Ralph Merriman)

I built an Isfjord using rolling bevels instead. Seems like Bjorn's tchnique would save alot of time but I was wondering if it would come out heavier, given the epoxy fills in all those little gaps between the strips on the inside. Would be interested in the experience of anyone who has built it without edge-gluing.

Messages In This Thread

Strip: questions on building Njord
george jung -- 10/27/2013, 3:28 pm
Re: Strip: questions on building Njord
JohnAbercrombie -- 10/27/2013, 4:08 pm
Re: Strip: questions on building Njord
JohnAbercrombie -- 10/27/2013, 4:17 pm
Re: Strip: questions on building Njord
Ralph Merriman -- 10/27/2013, 4:48 pm
Re: Strip: questions on building Njord
Oliver -- 10/27/2013, 4:55 pm
Re: Strip: questions on building Njord
Björn Thomasson -- 10/27/2013, 6:49 pm
Re: Strip: questions on building Njord
george jung -- 10/27/2013, 6:50 pm