Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Fix on poorly cut hatch opening
By:John Messinger
Date: 11/7/2013, 4:08 pm
In Response To: Re: S&G: Fix on poorly cut hatch opening (Paul Davies)

Too tight!unless you can just lift the hatch away all together. ,

Concur. When I wrote 0.5 mm I was thinking of all the tape that would be required add up to the 1/16" of gap I have in my hatches. I was thinking once one pryed the hatch out of the hole. One could sand it back to the gap needed but did not add that to my post. Thank you for for clarifying the post.

Messages In This Thread

S&G: Fix on poorly cut hatch opening
John Faas -- 11/6/2013, 1:59 am
Re: S&G: Fix on poorly cut hatch opening
John Messinger -- 11/6/2013, 6:17 am
Re: S&G: Fix on poorly cut hatch opening
John Faas -- 11/6/2013, 10:22 am
Re: S&G: Fix on poorly cut hatch opening
John Messinger -- 11/6/2013, 12:29 pm
Re: S&G: Fix on poorly cut hatch opening
John Messinger -- 11/7/2013, 8:21 am
Re: S&G: Fix on poorly cut hatch opening
John Faas -- 11/7/2013, 11:15 am
Re: S&G: Fix on poorly cut hatch opening
John Messinger -- 11/7/2013, 12:33 pm
Re: S&G: Fix on poorly cut hatch opening
Paul Davies -- 11/7/2013, 2:44 pm
Re: S&G: Fix on poorly cut hatch opening
John Messinger -- 11/7/2013, 4:08 pm