Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Epoxy: Pre preg
In Response To: Re: Epoxy: Pre preg (TMH)
Colder -10 degrees F for example.
If it matters I can find out exactly, but this is prepreg for an autoclave, cured at 350 degrees F and 80PSI.
Messages In This Thread
- Epoxy: Pre preg
TMH -- 9/28/2013, 2:37 pm- Re: Epoxy: Pre preg
Marc Upchurch -- 9/28/2013, 4:04 pm- Re: Epoxy: Pre preg
TMH -- 11/12/2013, 1:40 pm- Re: Epoxy: Pre preg
Marc Upchurch -- 11/12/2013, 4:38 pm- Re: Epoxy: Pre preg
TMH -- 11/13/2013, 4:56 pm- Re: Epoxy: Pre preg
TMH -- 11/13/2013, 6:31 pm- Re: Epoxy: Pre preg
Marc Upchurch -- 11/13/2013, 6:46 pm - Re: Epoxy: Pre preg
- Re: Epoxy: Pre preg
- Re: Epoxy: Pre preg
- Re: Epoxy: Pre preg
- Re: Epoxy: Pre preg
Matt Jakubek -- 9/28/2013, 4:49 pm- Re: Epoxy: Pre preg
TMH -- 9/28/2013, 7:41 pm
- One caution
Brian Nystrom -- 9/30/2013, 7:26 am- Re: One caution
Matthew Bastian -- 11/13/2013, 4:15 pm
- Re: Epoxy: Pre preg
- Re: Epoxy: Pre preg
