Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: A simple fiberglass question
By:Etienne Muller
Date: 12/13/2013, 1:49 pm
In Response To: Re: Strip: A simple fiberglass question (Bill Hamm)

If it's very warm, and it should be if you want a clear resin job, a container that is shallow is better, keeping the mass down keeps the internal heat in the resin down and slows the setting reaction, gives you more time to work.

That is why I pour the whole lot out along the keel and spread it all in one to. Can't get shallower than that. If you are applying with a roller then a tray would be used. For actual mixing, one gets a better mix if one is mixing in a slightly deeper rather than wide bottomed container.

Et

Messages In This Thread

Strip: Finished inlay, ready for glass! *PIC*
Greg Galloway -- 12/8/2013, 10:31 pm
Re: Strip: Finished inlay, ready for glass!
M Hammond -- 12/9/2013, 12:32 am
Re: Strip: Finished inlay, ready for glass!
Bill Hamm -- 12/9/2013, 1:03 am
Re: Strip: Finished inlay, ready for glass!
Etienne Muller -- 12/9/2013, 2:39 am
Re: Strip: Finished inlay, ready for glass!
John Messinger -- 12/9/2013, 7:07 am
How did you do it?
jay Babina -- 12/9/2013, 8:40 am
Re: How did you do it?
Greg Galloway -- 12/9/2013, 11:01 am
Dan's "Queen of my Heart"
Greg Galloway -- 12/9/2013, 11:12 am
Re: Dan's "Queen of my Heart"
Dan Caouette (CSCWC) -- 12/11/2013, 9:17 am
Re: How did you do it?
Marc Upchurch -- 12/9/2013, 4:27 pm
Re: How did you do it?
Don T. -- 12/9/2013, 4:45 pm
Re: How did you do it?
Etienne Muller -- 12/9/2013, 5:39 pm
Thanks for posting that series
Jay Babina -- 12/10/2013, 8:42 am
Re: Thanks for posting that series
Greg Galloway -- 12/10/2013, 9:18 am
Re: Thanks for posting that series
Kurt Maurer -- 12/10/2013, 8:45 pm
Re: Thanks for posting that series
Greg Galloway -- 12/10/2013, 9:55 pm
Strip: A simple fiberglass question
Greg Galloway -- 12/11/2013, 9:59 pm
Re: Strip: A simple fiberglass question
Bill Hamm -- 12/12/2013, 1:28 am
Re: Strip: A simple fiberglass question *PIC*
Etienne Muller -- 12/12/2013, 7:15 am
Re: Strip: A simple fiberglass question
Etienne Muller -- 12/12/2013, 7:20 am
Re: Strip: A simple fiberglass question
Greg Galloway -- 12/12/2013, 8:52 pm
Re: Strip: A simple fiberglass question
Etienne Muller -- 12/13/2013, 4:54 am
Re: Strip: A simple fiberglass question
wysedav -- 12/12/2013, 9:08 pm
Re: Strip: A simple fiberglass question
Bill Hamm -- 12/13/2013, 10:15 am
Re: Strip: A simple fiberglass question
Etienne Muller -- 12/13/2013, 1:49 pm
Re: Strip: A simple fiberglass question
JohnAbercrombie -- 12/13/2013, 6:33 pm
Re: Strip: A simple fiberglass question
Etienne Muller -- 12/13/2013, 7:07 pm
Re: Strip: A simple fiberglass question
Bill Hamm -- 12/15/2013, 12:33 am
Re: Strip: A simple fiberglass question
Bill Hamm -- 12/15/2013, 12:30 am
Re: Strip: Finished inlay, ready for glass!
Greg Galloway -- 12/20/2013, 7:23 pm
Re: Strip: Finished inlay, ready for glass! *PIC*
Etienne Muller -- 12/21/2013, 12:44 pm
Re: Strip: Finished inlay, ready for glass!
Greg Galloway -- 12/21/2013, 6:26 pm
Re: Strip: Finished inlay, ready for glass!
Marc Upchurch -- 12/21/2013, 7:00 pm
Re: Strip: Finished inlay, ready for glass!
Bill Hamm -- 12/22/2013, 12:17 am
Re: Strip: Finished inlay, ready for glass!
Etienne Muller -- 12/22/2013, 5:23 am
Re: Strip: Finished inlay, ready for glass!
Bill Hamm -- 12/23/2013, 12:02 am
Re: Strip: Finished inlay, ready for glass!
Etienne Muller -- 12/23/2013, 5:22 am
Re: Strip: Finished inlay, ready for glass!
Greg Galloway -- 8/24/2014, 10:55 am
Re: Strip: Finished inlay, ready for glass!
Marc Upchurch -- 8/24/2014, 11:39 am
Re: Strip: Finished inlay, ready for glass!
Greg Galloway -- 8/24/2014, 12:20 pm