Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Resizing a MicroBootlegger - Nick?
By:Nick Schade - Guillemot Kayaks
Date: 12/26/2013, 7:16 pm
In Response To: Strip: Resizing a MicroBootlegger - Nick? (Marc Upchurch)

I am planning on building a microBootlegger for my Daughter and son in law.
The are smaller people 5' and 5'4" and a total of about 270#.

The concern is that the 27" beam and ~540# capacity are both bigger than needed. Height of the cockpit rim might also be higher than comfortable.

Marc,
As a tandem 27" is fairly narrow (Tandem kayaks are often over 30"), but I found it stable enough that I could mount the seats fairly high, this compensated for the relatively high coaming.

The design works quite well in a wide range of displacements. The capacity of 540# is a maximum, but the design paddles quite well with a solo paddler less than 200#.

That said, scaling it down is not out of the question, and for a couple lightweight paddlers may be a good option.

Messages In This Thread

Strip: Resizing a MicroBootlegger - Nick?
Marc Upchurch -- 12/25/2013, 3:09 pm
Re: Strip: Resizing a MicroBootlegger - Nick?
Reg Lake -- 12/25/2013, 5:46 pm
Re: Strip: Resizing a MicroBootlegger - Nick?
Bill Hamm -- 12/26/2013, 12:30 am
Re: Strip: Resizing a MicroBootlegger - Nick? *PIC*
John Messinger -- 12/26/2013, 8:59 am
Re: Strip: Resizing a MicroBootlegger - Nick?
Nick Schade - Guillemot Kayaks -- 12/26/2013, 7:16 pm
Re: Strip: Resizing a MicroBootlegger - Nick?
Marc Upchurch -- 12/26/2013, 7:39 pm