I appreciate all the variations shown, but I have a question, since I have never stripped with an external strongback.

It is easy to understand building the hull.
Please show what is necessary when you are doing the deck.

I don't think I have any pics that show much interesting detail on that, sorry.
There are different approaches to the sequence of operations, I think.
With the near-constant humidity in my area, it's not so critical to get both sides of the hull glassed quickly. I glass the outside of the hull, unscrew the forms from the strongback, and flip the hull over to rest in some supports. Then I strip the deck and glass it on the outside. Separate the hull& deck, remove the forms, glass the hull inside, glass the deck inside, etc... I do take some care to keep the hull & deck 'mated' as much as possible to avoid their shapes diverging too much.
Also, I'm retired, so work pretty much full-time at this stage, so not a lot of time elapses. It's a different situation if you are building on weekends only.
Others remove the forms from the hull, glass the hull inside, and re-insert the forms into the hull before stripping the deck IIRC.