Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Finally building
By:ddaniels
Date: 3/19/2014, 6:04 am
In Response To: Re: Strip: Finally building (Bill Hamm)

I always use the ply building stem. Cut of the tapered end with the jigsaw and glue it on again with hotmelt. This part will sty in the boat after building and the rest will be removed just as the other building forms. This way you have always the right form and the extra weight is no problem for me.

Daa

Messages In This Thread

Strip: Finally building *PIC*
Dan -- 3/17/2014, 11:53 am
Re: Strip: Finally building
A. Edie -- 3/17/2014, 12:19 pm
Re: Strip: Finally building
Kevin Greer -- 3/17/2014, 1:37 pm
Re: Strip: Finally building
Dan -- 3/17/2014, 4:14 pm
Re: Strip: Finally building
Marc Upchurch -- 3/17/2014, 3:04 pm
Re: Strip: Finally building
Marc Upchurch -- 3/17/2014, 5:44 pm
Re: Strip: Finally building
Dan -- 3/17/2014, 10:15 pm
Re: Strip: Finally building
John van burden -- 3/17/2014, 9:36 pm
Re: Strip: Finally building
Marc Upchurch -- 3/17/2014, 10:49 pm
Re: Strip: Finally building
scottbaxter -- 3/17/2014, 10:46 pm
Re: Strip: Finally building
Dan -- 3/17/2014, 10:59 pm
Re: Strip: Finally building
ancient kayaker -- 3/18/2014, 12:48 am
Re: Strip: Finally building
Bill Hamm -- 3/18/2014, 12:56 am
Re: Strip: Finally building
Bob Ten Eyck -- 3/18/2014, 11:16 am
Re: Strip: Finally building
ancient kayaker -- 3/18/2014, 11:17 pm
Re: Strip: Finally building
Marc Upchurch -- 3/18/2014, 11:55 am
Re: Strip: Finally building *PIC*
Sean Dawe -- 3/18/2014, 12:32 pm
Re: Strip: Finally building
A. Edie -- 3/18/2014, 12:46 pm
Re: Strip: Finally building
Allan -- 3/18/2014, 4:56 pm
Re: Strip: Finally building
A. Edie -- 3/18/2014, 7:29 pm
Re: Strip: Finally building
Dan -- 3/18/2014, 11:09 pm
Re: Strip: Finally building
ancient kayaker -- 3/18/2014, 11:21 pm
Re: Strip: Finally building
Dan -- 3/18/2014, 11:33 pm
Re: Strip: Finally building
Bill Hamm -- 3/19/2014, 12:44 am
Re: Strip: Finally building
ddaniels -- 3/19/2014, 6:04 am