Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Strongback is not straight
By:Kevin Greer
Date: 5/4/2014, 3:33 pm
In Response To: Strip: Strongback is not straight (Pat FLanagan)

Question: What material is your strong back? What is its thickness? In Florida I had to use 3/4 in plywood to make my strong back, instead of the 1/2 inch thick plywood that came with the CLC kit.

Messages In This Thread

Strip: Strongback is not straight
Pat FLanagan -- 5/4/2014, 3:18 pm
Re: Strip: Strongback is not straight
Lomic -- 5/4/2014, 3:22 pm
Re: Strip: Strongback is not straight
Pat FLanagan -- 5/4/2014, 3:28 pm
Re: Strip: Strongback is not straight
Kevin Greer -- 5/4/2014, 3:33 pm
Re: Strip: Strongback is not straight
Pat FLanagan -- 5/4/2014, 3:34 pm
Re: Strip: Strongback is not straight
Bill Hamm -- 5/5/2014, 12:07 am
Re: Strip: Strongback is not straight
JohnAbercrombie -- 5/4/2014, 3:44 pm
Re: Strip: Strongback is not straight
Paul Davies -- 5/4/2014, 4:01 pm
Re: Strip: Strongback is not straight
Marc Upchurch -- 5/4/2014, 5:56 pm
Re: Strip: Strongback is not straight
John Messinger -- 5/4/2014, 6:15 pm
Re: Strip: Strongback is not straight
John Messinger -- 5/4/2014, 6:24 pm
Re: Strip: Strongback is not straight
Pat Flanagan -- 5/4/2014, 7:03 pm
Re: Strip: Strongback is not straight
wanderfalk -- 5/5/2014, 1:18 am
Re: Strip: Strongback is not straight
John Messinger -- 5/5/2014, 6:28 am
Re: Strip: Strongback is not straight
Jay Babina -- 5/5/2014, 7:29 am
Re: Strip: Strongback is not straight
Kevin Greer -- 5/5/2014, 11:06 am
Re: Strip: Strongback is not straight
Marc Upchurch -- 5/5/2014, 1:01 pm
Re: Strip: Strongback is not straight
Pat FLanagan -- 5/5/2014, 9:50 pm
Re: Strip: Strongback is not straight
Kevin Greer -- 5/5/2014, 10:20 pm
Re: Strip: Strongback is not straight
Bill Hamm -- 5/6/2014, 12:12 am
Re: Strip: Strongback is not straight *PIC*
Martin Bunny -- 5/6/2014, 1:58 am
Re: Strip: Strongback is not straight
Bill Hamm -- 5/7/2014, 9:50 am
Re: Strip: Strongback is not straight
A. Edie -- 5/5/2014, 11:42 pm