Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Hello, and a question
By:Marc Upchurch
Date: 7/10/2014, 1:21 pm
In Response To: Hello, and a question (Paul Russell)

Paul,

I didn't read back thru everything, but have you ruled out SOF?
Depending upon how you build them (basic or gold plate like i do) here is a possible break down:
Wood - $40 (WRC)
Plywood - $80 (marine occume 1/2")
Cloth - $50 (dacron - from George Dyson - with shipping)
Paint - $40 (1 Gal Oil base paint or Helmsman Spar Varnish - you will have left over)
Misc - Brushes, screws, deck ropes, bungie
Seat - $20 (minicell foam - 3" back and 1" seat - might be reversed for others methods)
Float Bags - $30
Epoxy - a small amount for scarfing the stringers if you can't get 16' lengths like I cannot.

Total $260 + miscellaneous and your preferences

You could go cheaper, but you also need to consider the table/ beam to rig up your frames.

PS, gold platting things like I do cost me $500 for a 15' Yost Sea Tour 15 XL. 32#

you can find designs that have a similar shape to many S&G or Strip boats. The SOF will be lighter and in some ways more delicate. Mostly just in the finish appearance - cutting a skin is almost not an issue.

Make no mistake, I've built 6 SOF and now want to go back to Strip for any future boats.

Messages In This Thread

Strip: Hello, and a question
Paul Russell -- 7/7/2014, 10:37 am
Hello, and a question
Paul Russell -- 7/7/2014, 11:17 am
Re: Strip: Hello, and a question
Rob Macks/Laughing Loon CC&K -- 7/7/2014, 11:56 am
Re: Strip: Hello, and a question
John Messinger -- 7/7/2014, 12:24 pm
Re: Strip: Hello, and a question
Marc Upchurch -- 7/7/2014, 1:13 pm
Re: Strip: Hello, and a question
JohnAbercrombie -- 7/7/2014, 1:10 pm
Re: Strip: Hello, and a question
Nick Schade - Guillemot Kayaks -- 7/7/2014, 4:38 pm
Re: Strip: Hello, and a question
JohnAbercrombie -- 7/7/2014, 6:52 pm
Re: Strip: Hello, and a question
JohnAbercrombie -- 7/7/2014, 7:05 pm
Re: Strip: Hello, and a question
Nick Schade - Guillemot Kayaks -- 7/8/2014, 12:52 pm
Re: Strip: Hello, and a question
JohnAbercrombie -- 7/8/2014, 1:09 pm
Re: Strip: Hello, and a question
Bill Hamm -- 7/10/2014, 8:19 am
Re: Strip: Hello, and a question
John van burden -- 7/7/2014, 1:25 pm
Re: Strip: Hello, and a question
Paul Davies. -- 7/7/2014, 3:50 pm
Hello, and a question
Paul Russell -- 7/7/2014, 4:17 pm
Re: Hello, and a question
Bill Hamm -- 7/8/2014, 12:11 am
Re: Hello, and a question
John van burden -- 7/8/2014, 8:43 am
Re: Strip: Hello, and a question
Mike Bielski -- 7/8/2014, 9:36 am
Re: Strip: Hello, and a question
John Faas -- 7/8/2014, 1:08 pm
Re: Strip: Hello, and a question
John van burden -- 7/8/2014, 1:41 pm
Re: Strip: Hello, and a question
Etienne Muller -- 7/8/2014, 1:32 pm
Re: Strip: Hello, and a question
Mike Bielski -- 7/9/2014, 7:38 am
Re: Strip: Hello, and a question
Rob Macks/Laughing Loon CC&K -- 7/9/2014, 9:10 pm
Re: Strip: Hello, and a question
Mike Bielski -- 7/9/2014, 11:34 pm
Re: Strip: Hello, and a question
Rob Macks/Laughing Loon CC&K -- 7/10/2014, 10:29 am
Re: Strip: Hello, and a question
Mike Bielski -- 7/10/2014, 11:12 am
Re: Strip: Hello, and a question
Rob Macks/Laughing Loon CC&K -- 7/10/2014, 12:32 pm
Re: Strip: Hello, and a question
Mike Bielski -- 7/10/2014, 12:49 pm
Re: Strip: Hello, and a question
Paul Davies. -- 7/10/2014, 3:58 pm
Re: Strip: Hello, and a question
Etienne Muller -- 7/10/2014, 4:33 pm
Re: Strip: Hello, and a question
Rob Macks/Laughing Loon CC&K -- 7/10/2014, 5:37 pm
Re: Strip: Hello, and a question
Bill Hamm -- 7/13/2014, 12:55 am
Re: Strip: Hello, and a question
Mike Bielski -- 7/13/2014, 1:49 am
Hello, and a question
Paul Russell -- 7/8/2014, 3:58 pm
Re: Hello, and a question
Bill Hamm -- 7/9/2014, 1:20 am
Re: Hello, and a question
Marc Upchurch -- 7/9/2014, 10:47 am
Re: Hello, and a question
John Faas -- 7/9/2014, 6:07 pm
Re: Hello, and a question
scottbaxter -- 7/9/2014, 11:19 pm
Hello, and a question
Paul Russell -- 7/10/2014, 10:39 am
Re: Hello, and a question
JohnAbercrombie -- 7/10/2014, 12:06 pm
Hello, and a question
Paul Russell -- 7/10/2014, 12:22 pm
Re: Hello, and a question
JohnAbercrombie -- 7/10/2014, 12:45 pm
Hello, and a question
Paul Russell -- 7/10/2014, 12:56 pm
Re: Hello, and a question
Marc Upchurch -- 7/10/2014, 1:21 pm
Re: Hello, and a question
JohnAbercrombie -- 7/10/2014, 1:27 pm
Re: Hello, and a question
Marc Upchurch -- 7/10/2014, 2:53 pm
Re: Hello, and a question
JohnAbercrombie -- 7/10/2014, 4:54 pm
Re: Hello, and a question
Marc Upchurch -- 7/10/2014, 5:23 pm
Re: Hello, and a question
JohnAbercrombie -- 7/10/2014, 6:54 pm
Re: Hello, and a question
JohnAbercrombie -- 7/10/2014, 1:21 pm
Re: Hello, and a question
Marc Upchurch -- 7/10/2014, 2:57 pm
Re: Hello, and a question
John Faas -- 7/14/2014, 1:39 pm
Re: Hello, and a question
JohnAbercrombie -- 7/14/2014, 2:35 pm
Re: Hello, and a question
JohnAbercrombie -- 7/10/2014, 1:00 pm
Re: Hello, and a question *PIC*
Etienne Muller -- 7/10/2014, 4:44 pm
Re: Hello, and a question
JohnAbercrombie -- 7/10/2014, 5:04 pm
Re: Hello, and a question
Etienne Muller -- 7/10/2014, 6:14 pm
Re: Hello, and a question
JohnAbercrombie -- 7/10/2014, 10:18 pm
Re: Hello, and a question
Dan Thaler -- 7/11/2014, 6:02 am
Re: Hello, and a question
ancient kayaker -- 7/12/2014, 8:06 pm
Re: Hello, and a question
Etienne Muller -- 7/13/2014, 10:02 am
Re: Strip: Hello, and a question
Donovan -- 7/14/2014, 4:03 pm
Hello, and a question
Paul Russell -- 7/15/2014, 12:02 pm
Re: Hello, and a question
Donovan -- 7/18/2014, 9:20 pm