Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: making Wood strips
By:ancient kayaker
Date: 7/15/2014, 7:51 am
In Response To: Re: Strip: making Wood strips (Bill Hamm)

A skilsaw in good condition with a decent blade will handle the first cut to get the thickness down to something that a small table saw can handle. There are a couple of tricks to this. Have a guide on both sides of the 4 x 4. A touch of wax on the blade, guides and bottom plate will cut down friction and discourage binding, and arranging a down-slope on the 4 x 4 will give a little assist from gravity - it's surprising how much that can help. Don't force it, take it easily and concentrate on controlling the saw. If things are going slow and there is smoke just stop, there is probably either a blunted blade or a bad bearing. The blade probably won't cut full depth so set depth to a hair more than half-way and turn over for the other cut. There will be some planing invovled . . .

Messages In This Thread

Strip: making Wood strips
Darren Edwards -- 7/13/2014, 8:52 am
Re: Strip: making Wood strips
ancient kayaker -- 7/13/2014, 10:05 am
Re: Strip: making Wood strips
Kurt Maurer -- 7/13/2014, 10:58 am
Re: Strip: making Wood strips
Marc Upchurch -- 7/13/2014, 10:36 am
Re: Strip: making Wood strips
JohnAbercrombie -- 7/13/2014, 11:24 am
Re: Strip: making Wood strips
JohnAbercrombie -- 7/13/2014, 1:57 pm
Re: Strip: making Wood strips *PIC*
ancient kayaker -- 7/13/2014, 2:29 pm
Re: Strip: making Wood strips
Don T. -- 7/13/2014, 9:31 pm
Re: Strip: making Wood strips *PIC*
ancient kayaker -- 7/14/2014, 12:50 pm
Re: Strip: making Wood strips
Jay Babina -- 7/14/2014, 7:55 am
Re: Strip: making Wood strips
JohnAbercrombie -- 7/14/2014, 11:48 am
Re: Strip: making Wood strips
Jay Babina -- 7/15/2014, 6:45 am
Re: Strip: making Wood strips
Darren edwards -- 7/14/2014, 10:44 am
Re: Strip: making Wood strips
Marc Upchurch -- 7/14/2014, 7:21 pm
Re: Strip: making Wood strips
Mike Bielski -- 7/14/2014, 11:35 pm
Re: Strip: making Wood strips
Mike Bielski -- 7/14/2014, 11:40 pm
Re: Strip: making Wood strips
Bill Hamm -- 7/15/2014, 12:32 am
Re: Strip: making Wood strips
Mike Bielski -- 7/15/2014, 12:46 am
Re: Strip: making Wood strips
Bill Hamm -- 7/15/2014, 3:46 am
Re: Strip: making Wood strips
Etienne Muller -- 7/15/2014, 5:57 am
Re: Strip: making Wood strips
JohnAbercrombie -- 7/15/2014, 12:43 pm
Re: Strip: making Wood strips
Bill Hamm -- 7/16/2014, 2:12 am
Re: Strip: making Wood strips
ancient kayaker -- 7/15/2014, 7:51 am
Re: Strip: making Wood strips
Bill Hamm -- 7/16/2014, 2:14 am
Re: Strip: making Wood strips
ancient kayaker -- 7/16/2014, 7:53 am
Re: Strip: making Wood strips
Bill Hamm -- 7/20/2014, 1:01 am
Re: Strip: making Wood strips
Darren.edwards -- 7/21/2014, 8:17 pm
Re: Strip: making Wood strips
JohnAbercrombie -- 7/21/2014, 9:50 pm
Re: Strip: making Wood strips
ancient kayaker -- 7/21/2014, 9:51 pm
Re: Strip: making Wood strips
Bill Hamm -- 7/22/2014, 12:22 am
Re: Strip: making Wood strips
ancient kayaker -- 7/22/2014, 10:17 am