Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: 3D printed cross sections
By:Bill Hamm
Date: 8/17/2014, 4:46 am
In Response To: Re: Skin-on-Frame: 3D printed cross sections *PIC* (SoggyDog)

I'm assuming you already have the tubing to fit? Go too much under 3/4" diameter and I suspect you'll have issues with strength unless you go with very heavy wall tube which quickly offsets any weight savings going to a smaller tube.

Bill H.

Messages In This Thread

Skin-on-Frame: 3D printed cross sections *PIC*
jamesshuang -- 7/15/2014, 2:24 pm
Re: Skin-on-Frame: 3D printed cross sections
Marc Upchurch -- 7/15/2014, 3:55 pm
Re: Skin-on-Frame: 3D printed cross sections
jamesshuang -- 7/15/2014, 4:05 pm
Re: Skin-on-Frame: 3D printed cross sections
JohnAbercrombie -- 7/15/2014, 3:56 pm
Re: Skin-on-Frame: 3D printed cross sections *PIC*
jamesshuang -- 7/15/2014, 4:17 pm
Re: Skin-on-Frame: 3D printed cross sections
JohnAbercrombie -- 7/15/2014, 5:22 pm
Re: Skin-on-Frame: 3D printed cross sections
Malcolm Schweizer -- 7/21/2014, 7:39 am
Re: Skin-on-Frame: 3D printed cross sections
jamesshuang -- 7/21/2014, 11:45 am
Re: Skin-on-Frame: 3D printed cross sections *PIC*
jamesshuang -- 7/24/2014, 1:22 am
Re: Skin-on-Frame: 3D printed cross sections
Paul Davies. -- 7/25/2014, 3:33 am
Re: Skin-on-Frame: 3D printed cross sections
jamesshuang -- 7/25/2014, 11:03 am
Re: Skin-on-Frame: 3D printed cross sections
Paul Davies. -- 7/26/2014, 3:10 am
Re: Skin-on-Frame: 3D printed cross sections
Marc Upchurch -- 7/26/2014, 9:45 am
Re: Skin-on-Frame: 3D printed cross sections
jamesshuang -- 7/29/2014, 2:08 pm
Re: Skin-on-Frame: 3D printed cross sections
Marc Upchurch -- 7/29/2014, 6:00 pm
Re: Skin-on-Frame: 3D printed cross sections
jamesshuang -- 7/29/2014, 8:23 pm
Re: Skin-on-Frame: 3D printed cross sections *PIC*
SoggyDog -- 8/15/2014, 4:31 pm
Re: Skin-on-Frame: 3D printed cross sections
Bill Hamm -- 8/17/2014, 4:46 am