Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Epoxy: Gummy epoxy
By:aikijay
Date: 9/8/2014, 12:18 pm

I just finished glassing the deck of my Guillimot. Put tow coats as described in Nick's book and filled the weave. Overnight everything cured up hard except for two areas about 8 inches square, each. Not sure why since it all came from the same batch. IN these areas the epoxy is partially cured but is still gummy. I discovered this as I tried to use my carbide scraper to level out a few drips and died bubbles. I was planning to sand and do a last "skim coat". So the questions is a) will these spots harden if I wait longer? b) if not, what should I do? C) when doing the skim coat to fill a few little spots where the weave is still visible, would it help to thin the epoxy to get it to flow out more smoothly? Thanks very much for the advice.
Jay

Messages In This Thread

Epoxy: Gummy epoxy
aikijay -- 9/8/2014, 12:18 pm
Re: Epoxy: Gummy epoxy
howard -- 9/8/2014, 10:02 pm
Re: Epoxy: Gummy epoxy
aikijay -- 9/8/2014, 10:46 pm
Re: Epoxy: Gummy epoxy
Allan -- 9/8/2014, 11:11 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/8/2014, 11:40 pm
Re: Epoxy: Gummy epoxy
Allan -- 9/9/2014, 12:16 am
Re: Epoxy: Gummy epoxy
howard -- 9/9/2014, 7:14 am
Re: Epoxy: Gummy epoxy *PIC*
Etienne Muller -- 9/9/2014, 7:15 am
Re: Epoxy: Gummy epoxy
Rob Macks/Laughing Loon CC&K -- 9/9/2014, 7:39 am
Re: Epoxy: Gummy epoxy
Robert Horstmann -- 9/9/2014, 9:03 am
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/9/2014, 11:43 am
Re: Epoxy: Gummy epoxy
Rob Macks/Laughing Loon CC&K -- 9/9/2014, 12:34 pm
Re: Epoxy: Gummy epoxy
Etienne Muller -- 9/12/2014, 3:45 am
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/12/2014, 12:47 pm
Re: Epoxy: Gummy epoxy
Etienne Muller -- 9/12/2014, 2:27 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/12/2014, 4:09 pm
Re: Epoxy: Gummy epoxy
Etienne Muller -- 9/12/2014, 4:45 pm
Re: Epoxy: Gummy epoxy
Bill Hamm -- 9/12/2014, 6:40 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/12/2014, 4:55 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/15/2014, 5:55 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/15/2014, 6:45 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/15/2014, 8:53 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/15/2014, 10:14 pm
Re: Epoxy: Gummy epoxy
aikijay -- 9/16/2014, 7:35 am
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/16/2014, 12:18 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/16/2014, 1:25 pm
Re: Epoxy: Gummy epoxy
george jung -- 9/16/2014, 2:53 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/16/2014, 4:01 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/16/2014, 3:59 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/16/2014, 5:24 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/16/2014, 9:00 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/15/2014, 6:50 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/15/2014, 8:48 pm
Re: Epoxy: Gummy epoxy
howard -- 9/15/2014, 9:37 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/15/2014, 10:19 pm
Re: Epoxy: Gummy epoxy
Allan -- 9/15/2014, 11:04 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/16/2014, 12:07 am
Re: Epoxy: Gummy epoxy
Allan -- 9/16/2014, 12:45 am
Re: Epoxy: Gummy epoxy
Allan -- 9/16/2014, 12:53 am
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/12/2014, 4:42 pm
Re: Epoxy: Gummy epoxy
Bill Hamm -- 9/10/2014, 12:49 am