Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Gummy epoxy
By:Rob Macks/Laughing Loon CC&K
Date: 9/9/2014, 12:34 pm
In Response To: Re: Epoxy: Gummy epoxy (Jay Stallman)

If it was a fill coat which did not harden, you can remove the soft resin with alcohol and course steel wool.

If that doesn't do it switch to lacquer thinner.

I'd go over the areas you've scraped to make sure you've removed all the uncured resin.

Then you're good to re-coat those areas.

Rob

Messages In This Thread

Epoxy: Gummy epoxy
aikijay -- 9/8/2014, 12:18 pm
Re: Epoxy: Gummy epoxy
howard -- 9/8/2014, 10:02 pm
Re: Epoxy: Gummy epoxy
aikijay -- 9/8/2014, 10:46 pm
Re: Epoxy: Gummy epoxy
Allan -- 9/8/2014, 11:11 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/8/2014, 11:40 pm
Re: Epoxy: Gummy epoxy
Allan -- 9/9/2014, 12:16 am
Re: Epoxy: Gummy epoxy
howard -- 9/9/2014, 7:14 am
Re: Epoxy: Gummy epoxy *PIC*
Etienne Muller -- 9/9/2014, 7:15 am
Re: Epoxy: Gummy epoxy
Rob Macks/Laughing Loon CC&K -- 9/9/2014, 7:39 am
Re: Epoxy: Gummy epoxy
Robert Horstmann -- 9/9/2014, 9:03 am
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/9/2014, 11:43 am
Re: Epoxy: Gummy epoxy
Rob Macks/Laughing Loon CC&K -- 9/9/2014, 12:34 pm
Re: Epoxy: Gummy epoxy
Etienne Muller -- 9/12/2014, 3:45 am
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/12/2014, 12:47 pm
Re: Epoxy: Gummy epoxy
Etienne Muller -- 9/12/2014, 2:27 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/12/2014, 4:09 pm
Re: Epoxy: Gummy epoxy
Etienne Muller -- 9/12/2014, 4:45 pm
Re: Epoxy: Gummy epoxy
Bill Hamm -- 9/12/2014, 6:40 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/12/2014, 4:55 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/15/2014, 5:55 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/15/2014, 6:45 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/15/2014, 8:53 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/15/2014, 10:14 pm
Re: Epoxy: Gummy epoxy
aikijay -- 9/16/2014, 7:35 am
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/16/2014, 12:18 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/16/2014, 1:25 pm
Re: Epoxy: Gummy epoxy
george jung -- 9/16/2014, 2:53 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/16/2014, 4:01 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/16/2014, 3:59 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/16/2014, 5:24 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/16/2014, 9:00 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/15/2014, 6:50 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/15/2014, 8:48 pm
Re: Epoxy: Gummy epoxy
howard -- 9/15/2014, 9:37 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/15/2014, 10:19 pm
Re: Epoxy: Gummy epoxy
Allan -- 9/15/2014, 11:04 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/16/2014, 12:07 am
Re: Epoxy: Gummy epoxy
Allan -- 9/16/2014, 12:45 am
Re: Epoxy: Gummy epoxy
Allan -- 9/16/2014, 12:53 am
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/12/2014, 4:42 pm
Re: Epoxy: Gummy epoxy
Bill Hamm -- 9/10/2014, 12:49 am