Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Gummy epoxy
By:Etienne Muller
Date: 9/12/2014, 2:27 pm
In Response To: Re: Epoxy: Gummy epoxy (Jay Stallman)

Don't use thinners. If you want the resin to flow better just give it a blast with the heat gun or with even a hair dryer.

A few runs or lumps can be scraped off with a utility knife blade or with a cabinet scraper. Scraping perpendicular to the surface. Not cutting. Then just sand to prep,for varnishing. Use water to get the dust off, not thinners or alcohol.

Et

Messages In This Thread

Epoxy: Gummy epoxy
aikijay -- 9/8/2014, 12:18 pm
Re: Epoxy: Gummy epoxy
howard -- 9/8/2014, 10:02 pm
Re: Epoxy: Gummy epoxy
aikijay -- 9/8/2014, 10:46 pm
Re: Epoxy: Gummy epoxy
Allan -- 9/8/2014, 11:11 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/8/2014, 11:40 pm
Re: Epoxy: Gummy epoxy
Allan -- 9/9/2014, 12:16 am
Re: Epoxy: Gummy epoxy
howard -- 9/9/2014, 7:14 am
Re: Epoxy: Gummy epoxy *PIC*
Etienne Muller -- 9/9/2014, 7:15 am
Re: Epoxy: Gummy epoxy
Rob Macks/Laughing Loon CC&K -- 9/9/2014, 7:39 am
Re: Epoxy: Gummy epoxy
Robert Horstmann -- 9/9/2014, 9:03 am
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/9/2014, 11:43 am
Re: Epoxy: Gummy epoxy
Rob Macks/Laughing Loon CC&K -- 9/9/2014, 12:34 pm
Re: Epoxy: Gummy epoxy
Etienne Muller -- 9/12/2014, 3:45 am
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/12/2014, 12:47 pm
Re: Epoxy: Gummy epoxy
Etienne Muller -- 9/12/2014, 2:27 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/12/2014, 4:09 pm
Re: Epoxy: Gummy epoxy
Etienne Muller -- 9/12/2014, 4:45 pm
Re: Epoxy: Gummy epoxy
Bill Hamm -- 9/12/2014, 6:40 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/12/2014, 4:55 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/15/2014, 5:55 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/15/2014, 6:45 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/15/2014, 8:53 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/15/2014, 10:14 pm
Re: Epoxy: Gummy epoxy
aikijay -- 9/16/2014, 7:35 am
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/16/2014, 12:18 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/16/2014, 1:25 pm
Re: Epoxy: Gummy epoxy
george jung -- 9/16/2014, 2:53 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/16/2014, 4:01 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/16/2014, 3:59 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/16/2014, 5:24 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/16/2014, 9:00 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/15/2014, 6:50 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/15/2014, 8:48 pm
Re: Epoxy: Gummy epoxy
howard -- 9/15/2014, 9:37 pm
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/15/2014, 10:19 pm
Re: Epoxy: Gummy epoxy
Allan -- 9/15/2014, 11:04 pm
Re: Epoxy: Gummy epoxy
Jay Stallman -- 9/16/2014, 12:07 am
Re: Epoxy: Gummy epoxy
Allan -- 9/16/2014, 12:45 am
Re: Epoxy: Gummy epoxy
Allan -- 9/16/2014, 12:53 am
Re: Epoxy: Gummy epoxy
JohnAbercrombie -- 9/12/2014, 4:42 pm
Re: Epoxy: Gummy epoxy
Bill Hamm -- 9/10/2014, 12:49 am