Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Outside seam tape
By:Gordon
Date: 10/9/2014, 2:47 pm
In Response To: Re: Strip: Outside seam tape (Gero Verheyen)

Gero..... Thanks for your response to my question....
The hull and deck were glassed separately and mated together with seam tape on the inside only, with the outside just butted tight with out any epoxy or tape on it yet.

As stated earlier of my intended use of the kayak, do you think just a couple coats of epoxy over the joined seam, without the cloth would create a strong enough joint. If so this sure would make it a lot easier with my feathering skills...

Thanks..... Gordon

Messages In This Thread

Strip: Outside seam tape
Gordon -- 10/9/2014, 11:19 am
Re: Strip: Outside seam tape
JohnAbercrombie -- 10/9/2014, 12:42 pm
Re: Strip: Outside seam tape
Gordon -- 10/9/2014, 1:18 pm
Re: Strip: Outside seam tape
JohnAbercrombie -- 10/9/2014, 1:24 pm
Re: Strip: Outside seam tape
Gero Verheyen -- 10/9/2014, 1:26 pm
Re: Strip: Outside seam tape
Gordon -- 10/9/2014, 2:47 pm
Re: Strip: Outside seam tape
Gero Verheyen -- 10/9/2014, 2:56 pm
Re: Strip: Outside seam tape
Gordon -- 10/9/2014, 3:08 pm
Re: Strip: Outside seam tape *PIC*
howard -- 10/9/2014, 10:38 pm
Re: Strip: Outside seam tape
Gero Verheyen -- 10/9/2014, 11:34 pm
Re: Strip: Outside seam tape
Bill Hamm -- 10/10/2014, 9:11 am
Re: Strip: Outside seam tape
Gero Verheyen -- 10/10/2014, 12:22 pm
Re: Strip: Outside seam tape
JohnAbercrombie -- 10/10/2014, 1:12 pm
Re: Strip: Outside seam tape *PIC*
Etienne Muller -- 10/10/2014, 2:14 pm
Re: Strip: Outside seam tape
Bill Hamm -- 10/10/2014, 2:28 pm