Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Yes - fine sand
In Response To: Re: Strip: Sanded through fiberglass weave (Triad)
Use wet / dry paper and start with maybe 600 and go even higher and because it's wet, you'll actually see the weave disappear as you continue (usually). Once you get it to disappear, let it dry and go from there with either epoxy or varnish.
No guarantees, but I have done it many times.
Messages In This Thread
- Strip: Sanded through fiberglass weave
Alex Helwig -- 10/22/2014, 6:59 pm- Re: Strip: Sanded through fiberglass weave
Triad -- 10/22/2014, 8:02 pm- Re: Strip: Sanded through fiberglass weave
Alex Helwig -- 10/22/2014, 9:16 pm- Re: Strip: Sanded through fiberglass weave
Triad -- 10/23/2014, 6:41 am- Re: Strip: Sanded through fiberglass weave
Brian Nystrom -- 10/23/2014, 7:23 am
- Re: Strip: Sanded through fiberglass weave
- Yes - fine sand
Jay Babina -- 10/23/2014, 1:41 pm - Re: Strip: Sanded through fiberglass weave
- Re: Strip: Sanded through fiberglass weave
Rob Macks/Laughing Loon CC&K -- 10/27/2014, 6:17 pm - Re: Strip: Sanded through fiberglass weave
- Re: Strip: Sanded through fiberglass weave
