Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: correcting mismatch before joining
By:Nick R.
Date: 10/26/2014, 8:18 am
In Response To: Strip: correcting mismatch before joining (Phil)

Phil, have you tried starting to fit the bow and stern first, get that taped and strapped down tight then work towards the center on both sides. good luck Nick R.

Messages In This Thread

Strip: correcting mismatch before joining
Phil -- 10/25/2014, 10:44 pm
Re: Strip: correcting mismatch before joining *PIC*
JohnAbercrombie -- 10/25/2014, 10:52 pm
Re: Strip: correcting mismatch before joining
Nick R. -- 10/26/2014, 8:18 am
Re: Strip: correcting mismatch before joining
Olli -- 10/26/2014, 11:36 am
Re: Strip: correcting mismatch before joining
Marc Upchurch -- 10/26/2014, 1:06 pm