Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: bead not coming out right on router
By:Marc Upchurch
Date: 11/2/2014, 5:54 pm
In Response To: Re: Strip: bead not coming out right on router (Jay Babina)

Lets not be too critical.
All he has to do is get the thickness right, then recut the bead on all the strips.
This is just a little adjustment

OBTW, I also don't like B&C, but it is quite reasonable to be able to make them.

I just don't like assembling and fairing the busted cove edges.

Messages In This Thread

Strip: bead not coming out right on router
Marc -- 11/2/2014, 12:40 am
Re: Strip: bead not coming out right on router
Jim777 -- 11/2/2014, 5:04 am
Re: Strip: bead not coming out right on router
Etienne Muller -- 11/2/2014, 7:12 am
Re: Strip: bead not coming out right on router
Marc Upchurch -- 11/2/2014, 9:12 am
Re: Strip: bead not coming out right on router
Bob Ten Eyck -- 11/2/2014, 10:58 am
Re: Strip: bead not coming out right on router
Jay Babina -- 11/2/2014, 5:36 pm
Re: Strip: bead not coming out right on router
Marc Upchurch -- 11/2/2014, 5:54 pm
Re: Strip: bead not coming out right on router
Dan Thaler -- 11/2/2014, 6:24 pm
Re: Strip: bead not coming out right on router
JohnAbercrombie -- 11/2/2014, 11:06 pm
Re: Strip: bead not coming out right on router
Etienne Muller -- 11/3/2014, 8:14 am
Re: Strip: bead not coming out right on router
Mike Bielski -- 11/5/2014, 8:36 am
Re: Strip: bead not coming out right on router
Marc Upchurch -- 11/3/2014, 8:22 am
Re: Strip: bead not coming out right on router
Triad -- 11/4/2014, 7:15 am
Re: Strip: bead not coming out right on router
Marc Upchurch -- 11/4/2014, 8:04 am
Re: Strip: bead not coming out right on router
Triad -- 11/4/2014, 8:28 am
Re: Strip: bead not coming out right on router
Bill Hamm -- 11/5/2014, 12:45 am
Re: Strip: bead not coming out right on router
Allan -- 11/5/2014, 1:59 am
Re: Strip: bead not coming out right on router
Bill Hamm -- 11/6/2014, 12:17 am
Re: Strip: bead not coming out right on router
Allan -- 11/6/2014, 3:57 am
Re: Strip: bead not coming out right on router
Dan Caouette (CSCWC) -- 11/6/2014, 7:46 am
Re: Strip: bead not coming out right on router
Bill Hamm -- 11/6/2014, 2:32 pm
Re: Strip: bead not coming out right on router
ddaniels -- 11/7/2014, 5:48 pm
Re: Strip: bead not coming out right on router
Bill Hamm -- 11/8/2014, 6:38 am