Re: Strip: bead not coming out right on router
In Response To: Re: Strip: bead not coming out right on router (Triad)
You don't need the extra strength.
Are you using a finger board before and after the strips when you cut them on the table saw?
Messages In This Thread
- Strip: bead not coming out right on router
Marc -- 11/2/2014, 12:40 am- Re: Strip: bead not coming out right on router
Jim777 -- 11/2/2014, 5:04 am- Re: Strip: bead not coming out right on router
Etienne Muller -- 11/2/2014, 7:12 am- Re: Strip: bead not coming out right on router
Marc Upchurch -- 11/2/2014, 9:12 am- Re: Strip: bead not coming out right on router
Bob Ten Eyck -- 11/2/2014, 10:58 am
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
Jay Babina -- 11/2/2014, 5:36 pm- Re: Strip: bead not coming out right on router
Marc Upchurch -- 11/2/2014, 5:54 pm- Re: Strip: bead not coming out right on router
Dan Thaler -- 11/2/2014, 6:24 pm- Re: Strip: bead not coming out right on router
JohnAbercrombie -- 11/2/2014, 11:06 pm- Re: Strip: bead not coming out right on router
Etienne Muller -- 11/3/2014, 8:14 am- Re: Strip: bead not coming out right on router
Mike Bielski -- 11/5/2014, 8:36 am
- Re: Strip: bead not coming out right on router
Marc Upchurch -- 11/3/2014, 8:22 am- Re: Strip: bead not coming out right on router
Triad -- 11/4/2014, 7:15 am- Re: Strip: bead not coming out right on router
Marc Upchurch -- 11/4/2014, 8:04 am- Re: Strip: bead not coming out right on router
Triad -- 11/4/2014, 8:28 am- Re: Strip: bead not coming out right on router
Bill Hamm -- 11/5/2014, 12:45 am- Re: Strip: bead not coming out right on router
Allan -- 11/5/2014, 1:59 am- Re: Strip: bead not coming out right on router
Bill Hamm -- 11/6/2014, 12:17 am- Re: Strip: bead not coming out right on router
Allan -- 11/6/2014, 3:57 am- Re: Strip: bead not coming out right on router
Dan Caouette (CSCWC) -- 11/6/2014, 7:46 am- Re: Strip: bead not coming out right on router
Bill Hamm -- 11/6/2014, 2:32 pm- Re: Strip: bead not coming out right on router
ddaniels -- 11/7/2014, 5:48 pm- Re: Strip: bead not coming out right on router
Bill Hamm -- 11/8/2014, 6:38 am
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router
- Re: Strip: bead not coming out right on router