Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Drips of epoxy on surface
By:Les Cheeseman
Date: 12/18/2014, 3:41 pm
In Response To: Re: Strip: Drips of epoxy on surface (Mike Bielski)

I have to agree with Mike on this. I pretty much ditch the ROS at the end of fairing out the bare wood.
Generaly, epoxy coats are too thin and if not you are anyway, probably heading for an unnecesarily heavy boat.
Taking the "slower" route of using a fairing board or similar, with less chance of colateral damage, is
likely to be the quickest method in the long run.

Messages In This Thread

Strip: Drips of epoxy on surface
Jay -- 12/18/2014, 7:25 am
Re: Strip: Drips of epoxy on surface
Marc Upchurch -- 12/18/2014, 8:43 am
Re: Strip: Drips of epoxy on surface
Rob Macks/Laughing Loon CC&K -- 12/18/2014, 9:29 am
Re: Strip: Drips of epoxy on surface
Jay Stallman -- 12/18/2014, 1:12 pm
Re: Strip: Drips of epoxy on surface
Rob Macks/Laughing Loon CC&K -- 12/18/2014, 2:02 pm
Re: Strip: Drips of epoxy on surface
Bill Hamm -- 12/18/2014, 2:27 pm
Re: Strip: Drips of epoxy on surface
Bill Hamm -- 12/18/2014, 9:34 am
Re: Strip: Drips of epoxy on surface
Mike Bielski -- 12/18/2014, 10:22 am
Re: Strip: Drips of epoxy on surface
Jay Stallman -- 12/18/2014, 1:08 pm
Re: Strip: Drips of epoxy on surface
Mike Bielski -- 12/18/2014, 2:44 pm
Re: Strip: Drips of epoxy on surface
Les Cheeseman -- 12/18/2014, 3:41 pm
Re: Strip: Drips of epoxy on surface
Rob Macks/Laughing Loon CC&K -- 12/18/2014, 4:26 pm
Re: Strip: Drips of epoxy on surface
Bill Hamm -- 12/19/2014, 8:28 am
Re: Strip: Drips of epoxy on surface
rich -- 12/18/2014, 2:21 pm
Re: Strip: Drips of epoxy on surface
Bill Hamm -- 12/18/2014, 2:37 pm
Re: Strip: Drips of epoxy on surface
wanderfalk -- 12/25/2014, 1:53 am
Re: Strip: Drips of epoxy on surface *PIC*
Etienne Muller -- 12/18/2014, 6:32 pm
Re: Strip: Drips of epoxy on surface
Mike Bielski -- 12/19/2014, 12:51 am
Re: Strip: Drips of epoxy on surface
Jay -- 1/4/2015, 6:48 pm
Re: Strip: Drips of epoxy on surface
Marc Upchurch -- 1/4/2015, 7:39 pm
Re: Strip: Drips of epoxy on surface
Jay Stallman -- 1/4/2015, 8:44 pm
Re: Strip: Drips of epoxy on surface
Marc Upchurch -- 1/4/2015, 8:50 pm
Re: Strip: Drips of epoxy on surface
Bill Hamm -- 1/5/2015, 12:10 am
Re: Strip: Drips of epoxy on surface
Jay Stallman -- 1/5/2015, 8:23 am
Re: Strip: Drips of epoxy on surface
Marc Upchurch -- 1/5/2015, 7:45 pm
Re: Strip: Drips of epoxy on surface
Jay Stallman -- 1/5/2015, 10:08 pm
Re: Strip: Drips of epoxy on surface
Marc Upchurch -- 1/5/2015, 10:23 pm
Re: Strip: Drips of epoxy on surface
Jay -- 1/5/2015, 10:34 pm
Re: Strip: Drips of epoxy on surface
Bill Hamm -- 1/6/2015, 12:32 am
Re: Strip: Drips of epoxy on surface
Etienne Muller -- 1/6/2015, 4:40 am
Re: Strip: Drips of epoxy on surface
JohnAbercrombie -- 1/4/2015, 9:52 pm