Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: cockpit cutout timimg *PIC*
By:Bob Ten Eyck
Date: 1/1/2015, 3:36 pm
In Response To: Re: Strip: cockpit cutout timimg (Douglas Spyrison)

Douglas, I finished the outside of the hull-glassed and fill coats while on the strongback. Then removed it and set it on hull supports.with the forms still in the hull. The deck then gets stripped with the cockpit in place. The wide pcs. are wrc bevel clap boards run thru a thickness planner to 3/16 "

Messages In This Thread

Strip: cockpit cutout timimg
Douglas Spyrison -- 12/31/2014, 12:20 pm
Re: Strip: cockpit cutout timimg
JohnAbercrombie -- 12/31/2014, 2:45 pm
Re: Strip: cockpit cutout timimg *PIC*
Bob Ten Eyck -- 12/31/2014, 5:33 pm
Re: Strip: cockpit cutout timimg
Douglas Spyrison -- 12/31/2014, 5:50 pm
Re: Strip: cockpit cutout timimg *PIC*
Bob Ten Eyck -- 1/1/2015, 3:36 pm
Re: Strip: cockpit cutout timimg
Douglas Spyrison -- 12/31/2014, 5:47 pm