Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: BP screw in hatches sealing
By:JohnAbercrombie
Date: 2/9/2015, 5:59 pm
In Response To: Re: Material: BP screw in hatches sealing (Thomas Duncan)

If I am going to do that, what do you think about just screwing the lids in, very careful to get none of the goo on the threads, and just use the lids to maintain the alignment, just set weights on the lid and wait for the cure?

I wouldn't do that...'living dangerously', and also difficult to clean up squeeze out (if any) under the deck.
A disk of plywood with weights would be my choice.

BTW, I usually mask around the hatch area (put on strips of masking tape, scribe with a blade and spacer using the hatch rim as a guide, peel off tape inside the line) . It makes cleanup a lot easier if you have excess squeezeout.

Messages In This Thread

Material: BP screw in hatches sealing
Thomas Duncan -- 2/8/2015, 11:26 am
Re: Material: BP screw in hatches sealing
JohnAbercrombie -- 2/8/2015, 12:10 pm
Re: Material: BP screw in hatches sealing
JohnAbercrombie -- 2/8/2015, 5:18 pm
Re: Material: BP screw in hatches sealing
Thomas Duncan -- 2/8/2015, 8:47 pm
Re: Material: BP screw in hatches sealing
Mike Bielski -- 2/8/2015, 10:18 pm
Re: Material: BP screw in hatches sealing
Brian Nystrom -- 2/9/2015, 8:40 am
Re: Material: BP screw in hatches sealing
daveg -- 2/9/2015, 11:42 pm
Re: Material: BP screw in hatches sealing
Bill Hamm -- 2/10/2015, 1:01 am
Re: Material: BP screw in hatches sealing
Brian Nystrom -- 2/10/2015, 7:28 am
Re: Material: BP screw in hatches sealing
Thomas Duncan -- 2/12/2015, 8:11 am
Re: Material: BP screw in hatches sealing
Jay Babina -- 2/9/2015, 8:55 am
Re: Material: BP screw in hatches sealing
Thomas Duncan -- 2/9/2015, 10:12 am
Re: Material: BP screw in hatches sealing
JohnAbercrombie -- 2/9/2015, 1:22 pm
Re: Material: BP screw in hatches sealing
Thomas Duncan -- 2/9/2015, 3:24 pm
Re: Material: BP screw in hatches sealing
JohnAbercrombie -- 2/9/2015, 5:59 pm
Re: Material: BP screw in hatches sealing
Thomas Duncan -- 2/9/2015, 6:30 pm
Re: Material: BP screw in hatches sealing
Thomas Duncan -- 2/9/2015, 7:58 pm
Like this stuff
Jay Babina -- 2/9/2015, 3:17 pm
Re: Like this stuff
Thomas Duncan -- 2/9/2015, 3:30 pm
Re: Like this stuff
Brian Nystrom -- 2/10/2015, 7:36 am
Re: Like this stuff
Jay Babina -- 2/10/2015, 3:01 pm
Re: Like this stuff
Mike Bielski -- 2/11/2015, 10:04 am