Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Minicell Foam
By:Jay Babina
Date: 5/17/2015, 8:17 am
In Response To: Material: Minicell Foam (yoshi)

Don't forget blush occurs on the inside of boats too so wash and sand the area you are going bond to.

Put a coat of contact cement on each surface, let it dry then a 2nd coat on each surface but sandwich it together when the coat is not wet by very sticky. Never water based contact cement but the solvent types. I have thigh braces and other things that have been on boats for years with a lot of submerging and no problems.

Messages In This Thread

Material: Minicell Foam
yoshi -- 5/14/2015, 11:11 am
Re: Material: Minicell Foam
Rod Tait -- 5/14/2015, 11:23 am
Re: Material: Minicell Foam
Dan Caouette (CSCWC) -- 5/14/2015, 11:42 am
Re: Material: Minicell Foam
Reg Lake -- 5/14/2015, 12:58 pm
Re: Material: Minicell Foam
Thomas Duncan -- 5/15/2015, 9:44 am
Re: Material: Minicell Foam
Reg Lake -- 5/15/2015, 11:55 am
Re: Material: Minicell Foam
dave koslow -- 5/14/2015, 11:35 am
Re: Material: Minicell Foam
yoshi -- 5/14/2015, 2:31 pm
Re: Material: Minicell Foam
dave koslow -- 5/14/2015, 4:01 pm
Re: Material: Minicell Foam
yoshi -- 5/14/2015, 6:14 pm
Re: Material: Minicell Foam
Bill Hamm -- 5/14/2015, 3:14 pm
Re: Material: Minicell Foam
Bill Hamm -- 5/14/2015, 7:33 pm
Re: Material: Minicell Foam
george jung -- 5/15/2015, 10:42 am
Re: Material: Minicell Foam
Jay Babina -- 5/17/2015, 8:17 am