Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Plywood 4 mm
By:JohnAbercrombie
Date: 6/11/2015, 2:38 pm
In Response To: Material: Plywood 4 mm (ALVO)

Hello

Im a first time builder and hope someone can answer my questions about Plywood

.............................
My plan was to make scarf joints. But I am not sure that's a good idea with the thinner outer layers.

Alvo:
I would use that plywood for a kayak project if I were adding glass and epoxy on both sides.
Are you planning to paint the kayak or leave it 'natural wood' finish?

Messages In This Thread

Material: Plywood 4 mm
ALVO -- 6/11/2015, 12:46 pm
Re: Material: Plywood 4 mm
JohnAbercrombie -- 6/11/2015, 2:38 pm
Re: Material: Plywood 4 mm
ALVO -- 6/11/2015, 2:58 pm
Re: Material: Plywood 4 mm
JohnAbercrombie -- 6/11/2015, 3:10 pm
Re: Material: Plywood 4 mm
John Messinger -- 6/11/2015, 3:12 pm
Re: Material: Plywood 4 mm
JohnAbercrombie -- 6/11/2015, 3:22 pm
Re: Material: Plywood 4 mm
ALVO -- 6/11/2015, 4:46 pm
Re: Material: Plywood 4 mm
Bill Hamm -- 6/11/2015, 6:11 pm
Re: Material: Plywood 4 mm
Tom C -- 6/12/2015, 10:56 am
Re: Material: Plywood 4 mm
Russ K -- 6/11/2015, 9:10 pm
Re: Material: Plywood 4 mm
JohnAbercrombie -- 6/11/2015, 10:36 pm
Re: Material: Plywood 4 mm
Niven Paine -- 6/11/2015, 10:59 pm
Re: Material: Plywood 4 mm
ALVO -- 6/12/2015, 12:41 am
Re: Material: Plywood 4 mm
Bill Hamm -- 6/12/2015, 6:37 am
Re: Material: Plywood 4 mm
JohnAbercrombie -- 6/12/2015, 8:11 pm
Re: Material: Plywood 4 mm
J vanburen -- 6/12/2015, 6:47 am
Re: Material: Plywood 4 mm
Charles Robinson -- 6/12/2015, 7:56 am
Re: Material: Plywood 4 mm
Bill Hamm -- 6/12/2015, 9:14 am
Re: Material: Plywood 4 mm *PIC*
Etienne Muller -- 6/12/2015, 9:43 am
Re: Material: Plywood 4 mm
bsoderholm -- 6/12/2015, 5:14 pm
Re: Material: Plywood 4 mm
Etienne Muller -- 6/12/2015, 5:33 pm