Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Plywood 4 mm
By:J vanburen
Date: 6/12/2015, 6:47 am
In Response To: Re: Material: Plywood 4 mm (ALVO)

I have had good success cutting scarfs on precut pieces using the stacked approach on top of and at the edge of a sturdy piece of wood and making the "Cut" using a belt sander with a gentle touch. The belt sander ad a very clean sharp cut!

I hope this is useful,
John VB

Messages In This Thread

Material: Plywood 4 mm
ALVO -- 6/11/2015, 12:46 pm
Re: Material: Plywood 4 mm
JohnAbercrombie -- 6/11/2015, 2:38 pm
Re: Material: Plywood 4 mm
ALVO -- 6/11/2015, 2:58 pm
Re: Material: Plywood 4 mm
JohnAbercrombie -- 6/11/2015, 3:10 pm
Re: Material: Plywood 4 mm
John Messinger -- 6/11/2015, 3:12 pm
Re: Material: Plywood 4 mm
JohnAbercrombie -- 6/11/2015, 3:22 pm
Re: Material: Plywood 4 mm
ALVO -- 6/11/2015, 4:46 pm
Re: Material: Plywood 4 mm
Bill Hamm -- 6/11/2015, 6:11 pm
Re: Material: Plywood 4 mm
Tom C -- 6/12/2015, 10:56 am
Re: Material: Plywood 4 mm
Russ K -- 6/11/2015, 9:10 pm
Re: Material: Plywood 4 mm
JohnAbercrombie -- 6/11/2015, 10:36 pm
Re: Material: Plywood 4 mm
Niven Paine -- 6/11/2015, 10:59 pm
Re: Material: Plywood 4 mm
ALVO -- 6/12/2015, 12:41 am
Re: Material: Plywood 4 mm
Bill Hamm -- 6/12/2015, 6:37 am
Re: Material: Plywood 4 mm
JohnAbercrombie -- 6/12/2015, 8:11 pm
Re: Material: Plywood 4 mm
J vanburen -- 6/12/2015, 6:47 am
Re: Material: Plywood 4 mm
Charles Robinson -- 6/12/2015, 7:56 am
Re: Material: Plywood 4 mm
Bill Hamm -- 6/12/2015, 9:14 am
Re: Material: Plywood 4 mm *PIC*
Etienne Muller -- 6/12/2015, 9:43 am
Re: Material: Plywood 4 mm
bsoderholm -- 6/12/2015, 5:14 pm
Re: Material: Plywood 4 mm
Etienne Muller -- 6/12/2015, 5:33 pm