Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Great Auk leaks.
By:Bill Hamm
Date: 8/11/2015, 9:24 am
In Response To: Re: Strip: Great Auk leaks. (Nick Riccardi)

The only problem with thinner layers of varnish is if it starts to fail before you refinish it, which is easy to do, then there's a chance you'll be sanding into the epoxy to get rid of the flaking, peeling varnish. With a thicker base coat of varnish this is less likely.

Bill H.

Messages In This Thread

Strip: Great Auk leaks.
chris wynne -- 8/1/2015, 11:56 am
Re: Strip: Great Auk leaks.
MattD. -- 8/1/2015, 12:11 pm
Re: Strip: Great Auk leaks.
scottbaxter -- 8/1/2015, 12:20 pm
Re: Strip: Great Auk leaks.
Marc Upchurch -- 8/1/2015, 2:14 pm
Re: Strip: Great Auk leaks.
Bill Hamm -- 8/1/2015, 4:35 pm
Re: Strip: Great Auk leaks.
JohnAbercrombie -- 8/1/2015, 8:44 pm
Re: Strip: Great Auk leaks.
Dan Thaler -- 8/2/2015, 8:03 am
Re: Strip: Great Auk leaks.
Nick Riccardi -- 8/2/2015, 9:24 am
Re: Strip: Great Auk leaks.
chris wynne -- 8/2/2015, 9:29 am
Re: Strip: Great Auk leaks.
Bill Hamm -- 8/2/2015, 9:36 am
Re: Strip: Great Auk leaks.
Nick Schade - Guillemot Kayaks -- 8/2/2015, 11:21 am
Re: Strip: Great Auk leaks.
Nick Riccardi -- 8/2/2015, 11:31 am
Re: Strip: Great Auk leaks.
Nick Schade - Guillemot Kayaks -- 8/2/2015, 7:37 pm
Re: Strip: Great Auk leaks.
Nick Riccardi -- 8/2/2015, 9:37 am
Re: Strip: Great Auk leaks.
chris wynne -- 8/2/2015, 9:40 am
Re: Strip: Great Auk leaks.
JohnAbercrombie -- 8/2/2015, 10:02 am
Re: Strip: Great Auk leaks.
chris wynne -- 8/2/2015, 11:46 am
Re: Strip: Great Auk leaks.
JohnAbercrombie -- 8/2/2015, 5:03 pm
Re: Strip: Great Auk leaks.
Jay Babina -- 8/2/2015, 8:15 pm
Re: Strip: Great Auk leaks.
Phil -- 8/10/2015, 11:22 am
Re: Strip: Great Auk leaks.
scottbaxter -- 8/10/2015, 2:10 pm
Re: Strip: Great Auk leaks.
Nick Riccardi -- 8/10/2015, 2:17 pm
Re: Strip: Great Auk leaks.
Bill Hamm -- 8/11/2015, 9:24 am
Re: Strip: Great Auk leaks.
Nick Riccardi -- 8/11/2015, 1:23 pm