Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: If going the dacron route?
By:Bob
Date: 8/26/2015, 4:09 pm
In Response To: Re: If going the dacron route? (Bill Hamm)

Ok - I didn't even consider needing to split the fabric and doing seams - glad I asked or I would've been cursing myself wondering why there were wrinkles still ;-)

Could I use epoxy paint as the epoxy coat over the dacron? If not, would pigmented epoxy be ok? Was thinking could save a coat or two of paint and at the same time have the paint protected (would still plan on putting 2-3 coats of varnish over the fiberglass when finishing up for uv protection

Messages In This Thread

Skin-on-Frame: skinning with PVC fabric on aluminum tube gunnels? *PIC*
Bob -- 8/24/2015, 10:50 am
Re: Skin-on-Frame: skinning with PVC fabric on alu
Marc Upchurch -- 8/24/2015, 8:48 pm
Re: Skin-on-Frame: skinning with PVC fabric on alu
Paul Montgomery -- 8/24/2015, 11:51 pm
Re: Skin-on-Frame: skinning with PVC fabric on alu
Bill Hamm -- 8/25/2015, 5:41 am
Re: Skin-on-Frame: skinning with PVC fabric on alu
Dave Gentry -- 8/25/2015, 10:34 am
If going the dacron route?
Bob -- 8/25/2015, 10:59 am
Re: If going the dacron route?
Bill Hamm -- 8/25/2015, 3:05 pm
Re: If going the dacron route?
Bill Hamm -- 8/25/2015, 3:11 pm
Re: If going the dacron route?
Bob -- 8/25/2015, 3:25 pm
Re: If going the dacron route?
Bill Hamm -- 8/25/2015, 3:41 pm
Re: If going the dacron route? *PIC*
Bob -- 8/25/2015, 4:56 pm
disregard image above
Bob -- 8/25/2015, 5:59 pm
Re: If going the dacron route?
Bill Hamm -- 8/26/2015, 12:39 am
Re: If going the dacron route?
Marc Upchurch -- 8/26/2015, 1:31 am
Re: If going the dacron route?
Bob -- 8/26/2015, 10:00 am
Re: If going the dacron route?
Bill Hamm -- 8/26/2015, 2:02 pm
Re: If going the dacron route?
Bob -- 8/26/2015, 4:09 pm
Re: If going the dacron route?
Bill Hamm -- 8/26/2015, 4:43 pm
Re: If going the dacron route?
Bob -- 8/26/2015, 5:08 pm
Re: If going the dacron route?
Bill Hamm -- 8/26/2015, 6:53 pm
Re: If going the dacron route?
Marc Upchurch -- 8/26/2015, 5:59 pm
Re: If going the dacron route?
Ian Cummins -- 8/25/2015, 3:35 pm