Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: If going the dacron route?
By:Marc Upchurch
Date: 8/26/2015, 5:59 pm
In Response To: Re: If going the dacron route? (Bob)

Bob,

I don't do Raka, but West has slow, fast, and regular hardner.
I actually like the summer for putting down glass, because the resin is less viscous when its warm, allowing you to do a very easy and consistent wet out of the fabric with few lumps/ issues.

I would just use a slow hardner in the summer to get accustomed to the process and the planning necessary.
Then graduate to the regular, you will easily be able to put down the epoxy and smooth it out without the resin starting to get hard.
Once you have gotten to the finish end of the boat the start will be well on the way to being cured so that you can put a fill coat on within a short time.

Messages In This Thread

Skin-on-Frame: skinning with PVC fabric on aluminum tube gunnels? *PIC*
Bob -- 8/24/2015, 10:50 am
Re: Skin-on-Frame: skinning with PVC fabric on alu
Marc Upchurch -- 8/24/2015, 8:48 pm
Re: Skin-on-Frame: skinning with PVC fabric on alu
Paul Montgomery -- 8/24/2015, 11:51 pm
Re: Skin-on-Frame: skinning with PVC fabric on alu
Bill Hamm -- 8/25/2015, 5:41 am
Re: Skin-on-Frame: skinning with PVC fabric on alu
Dave Gentry -- 8/25/2015, 10:34 am
If going the dacron route?
Bob -- 8/25/2015, 10:59 am
Re: If going the dacron route?
Bill Hamm -- 8/25/2015, 3:05 pm
Re: If going the dacron route?
Bill Hamm -- 8/25/2015, 3:11 pm
Re: If going the dacron route?
Bob -- 8/25/2015, 3:25 pm
Re: If going the dacron route?
Bill Hamm -- 8/25/2015, 3:41 pm
Re: If going the dacron route? *PIC*
Bob -- 8/25/2015, 4:56 pm
disregard image above
Bob -- 8/25/2015, 5:59 pm
Re: If going the dacron route?
Bill Hamm -- 8/26/2015, 12:39 am
Re: If going the dacron route?
Marc Upchurch -- 8/26/2015, 1:31 am
Re: If going the dacron route?
Bob -- 8/26/2015, 10:00 am
Re: If going the dacron route?
Bill Hamm -- 8/26/2015, 2:02 pm
Re: If going the dacron route?
Bob -- 8/26/2015, 4:09 pm
Re: If going the dacron route?
Bill Hamm -- 8/26/2015, 4:43 pm
Re: If going the dacron route?
Bob -- 8/26/2015, 5:08 pm
Re: If going the dacron route?
Bill Hamm -- 8/26/2015, 6:53 pm
Re: If going the dacron route?
Marc Upchurch -- 8/26/2015, 5:59 pm
Re: If going the dacron route?
Ian Cummins -- 8/25/2015, 3:35 pm