Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: RoboBevel
By:Marc Upchurch
Date: 2/1/2016, 7:39 am
In Response To: Re: Tools: RoboBevel (Mike Bielski)

Because the "frame" of the plane needs to flex to provide an approximation of the frames fore and aft of the cut.
Additionally, the blade needs to remain on the upper surface of the last strip.

An oversized molding plane does neither of those.

Messages In This Thread

Tools: RoboBevel *PIC*
Nick Schade - Guillemot Kayaks -- 1/30/2016, 7:27 pm
Re: Tools: RoboBevel
JohnAbercrombie -- 1/30/2016, 10:25 pm
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 1/31/2016, 9:33 am
Re: Tools: RoboBevel
Marc Upchurch -- 1/30/2016, 10:44 pm
Re: Tools: RoboBevel
scottbaxter -- 1/31/2016, 12:22 am
Re: Tools: RoboBevel
Dan Thaler -- 1/31/2016, 6:58 am
Re: Tools: RoboBevel
Etienne Muller -- 1/31/2016, 7:24 am
Re: Tools: RoboBevel
Marc Upchurch -- 1/31/2016, 9:00 am
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 1/31/2016, 9:33 am
Re: Tools: RoboBevel
Brian Nystrom -- 1/31/2016, 2:04 pm
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 1/31/2016, 8:47 pm
Re: Tools: RoboBevel
Mike Bielski -- 1/31/2016, 10:10 pm
Re: Tools: RoboBevel
Brian Nystrom -- 2/1/2016, 7:07 am
Re: Tools: RoboBevel
Mike Bielski -- 2/1/2016, 7:10 am
Re: Tools: RoboBevel
Marc Upchurch -- 2/1/2016, 7:39 am
Re: Tools: RoboBevel
Mike Bielski -- 2/1/2016, 7:57 am
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 2/1/2016, 8:07 am
Re: Tools: RoboBevel
Marc Upchurch -- 2/1/2016, 8:14 am
Re: Tools: RoboBevel
Bill Hamm -- 2/2/2016, 12:20 am
Re: Tools: RoboBevel
Marc Upchurch -- 2/2/2016, 7:58 am
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 2/2/2016, 8:23 am
Re: Tools: RoboBevel
Mike Bielski -- 2/2/2016, 12:35 pm
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 2/2/2016, 1:21 pm
Re: Tools: RoboBevel
Thomas Duncan -- 1/31/2016, 9:20 am
Re: Tools: RoboBevel
Bill Hamm -- 1/31/2016, 5:49 pm
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 1/31/2016, 6:21 pm
Re: Tools: RoboBevel
Marc Donnelly -- 1/31/2016, 8:47 pm
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 1/31/2016, 8:50 pm
Re: Tools: RoboBevel
Marc Donnelly -- 1/31/2016, 9:04 pm
Re: Tools: RoboBevel
Bill Hamm -- 2/1/2016, 12:00 am
Re: Tools: RoboBevel *PIC*
Etienne Muller -- 2/1/2016, 5:20 am
Re: Tools: RoboBevel
Marc Upchurch -- 2/1/2016, 7:52 am
Re: Tools: RoboBevel
John D. VanBuren -- 2/2/2016, 7:29 am