Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: RoboBevel
By:Bill Hamm
Date: 2/2/2016, 12:20 am
In Response To: Re: Tools: RoboBevel (Marc Upchurch)

I may be misunderstanding this, but the angle of the cut I'm assuming is 90 degrees to the face of the strip, so the new strip added has no bevel. Kinda the opposite of a rolling bevel, instead of cutting the rolling bevel on the new strip you're making the previously added strip with a square edge.

Bill H.

Messages In This Thread

Tools: RoboBevel *PIC*
Nick Schade - Guillemot Kayaks -- 1/30/2016, 7:27 pm
Re: Tools: RoboBevel
JohnAbercrombie -- 1/30/2016, 10:25 pm
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 1/31/2016, 9:33 am
Re: Tools: RoboBevel
Marc Upchurch -- 1/30/2016, 10:44 pm
Re: Tools: RoboBevel
scottbaxter -- 1/31/2016, 12:22 am
Re: Tools: RoboBevel
Dan Thaler -- 1/31/2016, 6:58 am
Re: Tools: RoboBevel
Etienne Muller -- 1/31/2016, 7:24 am
Re: Tools: RoboBevel
Marc Upchurch -- 1/31/2016, 9:00 am
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 1/31/2016, 9:33 am
Re: Tools: RoboBevel
Brian Nystrom -- 1/31/2016, 2:04 pm
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 1/31/2016, 8:47 pm
Re: Tools: RoboBevel
Mike Bielski -- 1/31/2016, 10:10 pm
Re: Tools: RoboBevel
Brian Nystrom -- 2/1/2016, 7:07 am
Re: Tools: RoboBevel
Mike Bielski -- 2/1/2016, 7:10 am
Re: Tools: RoboBevel
Marc Upchurch -- 2/1/2016, 7:39 am
Re: Tools: RoboBevel
Mike Bielski -- 2/1/2016, 7:57 am
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 2/1/2016, 8:07 am
Re: Tools: RoboBevel
Marc Upchurch -- 2/1/2016, 8:14 am
Re: Tools: RoboBevel
Bill Hamm -- 2/2/2016, 12:20 am
Re: Tools: RoboBevel
Marc Upchurch -- 2/2/2016, 7:58 am
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 2/2/2016, 8:23 am
Re: Tools: RoboBevel
Mike Bielski -- 2/2/2016, 12:35 pm
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 2/2/2016, 1:21 pm
Re: Tools: RoboBevel
Thomas Duncan -- 1/31/2016, 9:20 am
Re: Tools: RoboBevel
Bill Hamm -- 1/31/2016, 5:49 pm
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 1/31/2016, 6:21 pm
Re: Tools: RoboBevel
Marc Donnelly -- 1/31/2016, 8:47 pm
Re: Tools: RoboBevel
Nick Schade - Guillemot Kayaks -- 1/31/2016, 8:50 pm
Re: Tools: RoboBevel
Marc Donnelly -- 1/31/2016, 9:04 pm
Re: Tools: RoboBevel
Bill Hamm -- 2/1/2016, 12:00 am
Re: Tools: RoboBevel *PIC*
Etienne Muller -- 2/1/2016, 5:20 am
Re: Tools: RoboBevel
Marc Upchurch -- 2/1/2016, 7:52 am
Re: Tools: RoboBevel
John D. VanBuren -- 2/2/2016, 7:29 am