Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Petrel pre-build research *PIC*
By:Dan Thaler
Date: 2/7/2016, 10:22 am
In Response To: Re: Strip: Petrel pre-build research (Howard Spira)

Yes, 1/8" strips. This was not intentional. I had gotten some strips from someone who had milled them for another project that did not happen. They were not milled very precisely and when I was done fairing the hull and deck the result was 1/8" overall thickness.
On Petrel 2 I used 1/4" strips and the final weight was 40 pounds.
Petrel 1

Petrel 2

Dan

Messages In This Thread

Strip: Petrel pre-build research
Howard Spira -- 2/7/2016, 9:25 am
Re: Strip: Petrel pre-build research
Dan Thaler -- 2/7/2016, 10:04 am
Re: Strip: Petrel pre-build research
Howard Spira -- 2/7/2016, 10:13 am
Re: Strip: Petrel pre-build research *PIC*
Dan Thaler -- 2/7/2016, 10:22 am
Re: Strip: Petrel pre-build research
Marc Upchurch -- 2/7/2016, 10:19 am
Re: Strip: Petrel pre-build research
Allan -- 2/7/2016, 4:01 pm
Re: Strip: Petrel pre-build research
wysedav -- 2/7/2016, 4:01 pm
thank you and a related question
howard -- 2/8/2016, 7:26 pm
Re: thank you and a related question
Wysedav -- 2/8/2016, 8:04 pm
Re: thank you and a related question
Shawn Jones -- 2/27/2016, 2:15 am
Re: thank you and a related question
Howard Spira -- 3/5/2016, 8:34 pm
Re: thank you and a related question
JohnAbercrombie -- 3/5/2016, 9:42 pm
Re: thank you and a related question
Randy -- 3/6/2016, 1:05 pm
Re: thank you and a related question
Marc Upchurch -- 3/6/2016, 2:44 am
Re: thank you and a related question
Nick R. -- 3/7/2016, 11:22 am
Re: thank you and a related question
Dan Thaler -- 2/9/2016, 6:10 am