Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Varnish options
By:fadedred
Date: 5/2/2016, 8:06 pm
In Response To: Re: Material: Varnish options (Mike Bielski)

Hi Mike Looks like that Awlgrip take a long time in a booth to cure and needs 77 degrees to spray.

I've been using a Snap Dry clear coat or a panel and Overall Clear Coat ...I like the finish of the Chroma Base 4 to 1 Panel Clearcoat {G2-7779S} the best. It's a system that uses an actuator depending on air temp. Can successfully spray as low as 55 degrees {using the 60 to 70 deg actuator}

{It's an Automotive clear 2 part urethane}
Dries quick and gives me nice results

Best Wishes
Roy

Messages In This Thread

Material: Varnish options
Paul T -- 5/2/2016, 12:04 pm
Re: Material: Varnish options *PIC*
Dan Caouette (CSCWC) -- 5/2/2016, 1:06 pm
Re: Material: Varnish options
Yoshi -- 5/2/2016, 1:16 pm
Re: Material: Varnish options
Paul T -- 5/2/2016, 2:10 pm
Re: Material: Varnish options
Paul T -- 5/2/2016, 1:49 pm
Re: Material: Varnish options
Paul T -- 5/4/2016, 11:59 am
Re: Material: Varnish options
scottbaxter -- 5/4/2016, 9:41 pm
Re: Material: Varnish options
Bill Hamm -- 5/5/2016, 12:31 am
Re: Material: Varnish options
Curtis Fisher -- 5/5/2016, 5:47 pm
Re: Material: Varnish options
scottbaxter -- 5/5/2016, 11:37 pm
Re: Material: Varnish options
scottbaxter -- 5/5/2016, 11:40 pm
Thanks
Curtis Fisher -- 5/6/2016, 9:38 am
Re: Material: Varnish options
Jaybabina -- 5/3/2016, 12:02 pm
Re: Material: Varnish options
Bill Hamm -- 5/4/2016, 12:56 am
Re: Material: Varnish options
Mike Bielski -- 5/4/2016, 10:06 pm
Re: Material: Varnish options *NM*
Bill Hamm -- 5/5/2016, 12:10 am
Re: Material: Varnish options
Bill Hamm -- 5/5/2016, 12:12 am
Re: Material: Varnish options
Mike Bielski -- 5/2/2016, 7:27 pm
Re: Material: Varnish options
fadedred -- 5/2/2016, 8:06 pm
Re: Material: Varnish options
Mike Bielski -- 5/2/2016, 9:16 pm
Re: Material: Varnish options
fadedred -- 5/2/2016, 9:26 pm
Re: Material: Varnish options
Mike Bielski -- 5/2/2016, 9:28 pm
Re: Material: Varnish options
fadedred -- 5/2/2016, 9:39 pm
Re: Material: Varnish options
Mike Bielski -- 5/2/2016, 9:48 pm
Re: Material: Varnish options
Dan Caouette (CSCWC) -- 5/3/2016, 8:56 am
Re: Material: Varnish options
Mike Bielski -- 5/3/2016, 9:28 am