Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Fiberglassing the seam
By:JohnAbercrombie
Date: 5/30/2016, 12:17 pm
In Response To: Re: Strip: Fiberglassing the seam (Rob Macks/Laughing Loon CC&K)

Yes, I have rolls of 60" wide 4 oz. S-glass I use and I just cut strips off the roll.

Messing around with cutting and handling little bias strips is just a big PITA!

I agree that bias cut strips require very gentle handling, but (as you know) 60" glass will provide 80+" long bias strips, so I don't think that 'little' is part of the description.....
But, straight cutting is more economical and the strips are more stable, so if they work for you they obviously provide your best solution.
One advantage of bias strips is that they are much stronger in this application, since there are twice as many fiber bundles across the joint, compared to straight cut strips where the lengthwise fibers add no strength.

Messages In This Thread

Strip: Fiberglassing the seam *PIC*
Fred Brown -- 5/29/2016, 6:02 pm
Re: Strip: Fiberglassing the seam
Rod Tait -- 5/29/2016, 9:07 pm
Re: Strip: Fiberglassing the seam
Fred Brown -- 5/29/2016, 10:07 pm
Re: Strip: Fiberglassing the seam
JohnAbercrombie -- 5/29/2016, 11:10 pm
Re: Strip: Fiberglassing the seam
Fred Brown -- 5/30/2016, 6:46 am
Re: Strip: Fiberglassing the seam - bias cut is al
Ian Johnson -- 6/1/2016, 7:46 am
Re: Strip: Fiberglassing the seam - bias cut is al
Bill Hamm -- 6/2/2016, 12:49 am
Re: Strip: Fiberglassing the seam - bias cut is al
ian johnson -- 6/2/2016, 6:22 pm
Re: Strip: Fiberglassing the seam - bias cut is al
Sam McFadden -- 6/2/2016, 8:23 pm
Re: Strip: Fiberglassing the seam - bias cut is al
Bill Hamm -- 6/3/2016, 7:37 am
Re: Strip: Fiberglassing the seam - bias cut is al
Ian johnson -- 6/5/2016, 5:46 am
Re: Strip: Fiberglassing the seam
Brian Nystrom -- 5/30/2016, 4:02 pm
Re: Strip: Fiberglassing the seam
Nick Schade - Guillemot Kayaks -- 5/30/2016, 4:32 pm
Re: Strip: Fiberglassing the seam
Marc Donnelly -- 5/29/2016, 10:18 pm
Re: Strip: Fiberglassing the seam
Craig -- 5/30/2016, 6:06 am
Re: Strip: Fiberglassing the seam
Fred Brown -- 5/30/2016, 6:51 am
Re: Strip: Fiberglassing the seam
Bill Hamm -- 5/31/2016, 12:46 am
Re: Strip: Fiberglassing the seam
Rob Macks/Laughing Loon CC&K -- 5/30/2016, 10:19 am
Re: Strip: Fiberglassing the seam
JohnAbercrombie -- 5/30/2016, 11:43 am
Re: Strip: Fiberglassing the seam
Rob Macks/Laughing Loon CC&K -- 5/30/2016, 12:07 pm
Re: Strip: Fiberglassing the seam
JohnAbercrombie -- 5/30/2016, 12:17 pm
Re: Strip: Fiberglassing the seam
Rob Macks/Laughing Loon CC&K -- 5/30/2016, 1:45 pm
Re: Strip: Fiberglassing the seam
JohnAbercrombie -- 5/30/2016, 2:09 pm
Re: Strip: Fiberglassing the seam
JohnAbercrombie -- 5/30/2016, 2:16 pm
Re: Strip: Fiberglassing the seam
Rob Macks/Laughing Loon CC&K -- 5/30/2016, 2:27 pm
Failure modes
Nick Schade - Guillemot Kayaks -- 5/30/2016, 4:04 pm
Re: Failure modes
Rob Macks/Laughing Loon CC&K -- 5/30/2016, 5:08 pm
Re: Failure modes
Nick Schade - Guillemot Kayaks -- 5/30/2016, 7:27 pm
Re: Failure modes *PIC*
JohnAbercrombie -- 5/30/2016, 9:16 pm
Re: Failure modes
Bill Hamm -- 5/31/2016, 12:54 am
Re: Failure modes
Nick Schade - Guillemot Kayaks -- 5/31/2016, 11:07 am
Re: Failure modes
Marc Upchurch -- 5/31/2016, 12:14 pm
West System failure tests for strips
Mike Bielski -- 5/31/2016, 11:35 pm
Re: Strip: Fiberglassing the seam
Sam McFadden -- 5/31/2016, 2:06 pm
Re: Strip: Fiberglassing the seam
Marc Upchurch -- 5/31/2016, 3:38 pm
Re: Strip: Fiberglassing the seam
Nick Schade - Guillemot Kayaks -- 5/31/2016, 4:26 pm
Re: Strip: Fiberglassing the seam
Sam McFadden -- 5/31/2016, 5:01 pm
Re: Strip: Fiberglassing the seam
Bill Hamm -- 6/1/2016, 12:42 am
Re: Strip: Fiberglassing the seam
Bill Hamm -- 5/31/2016, 12:50 am
Re: Strip: Fiberglassing the seam
Fred Brown -- 5/30/2016, 11:59 am
Re: Strip: Fiberglassing the seam
Fred Brown -- 5/30/2016, 7:35 pm
Re: Strip: Fiberglassing the seam *PIC*
Etienne Muller -- 5/31/2016, 3:18 am
Re: Strip: Fiberglassing the seam
Bill Hamm -- 6/1/2016, 12:45 am