Strip: uneven 3/4" strips
Could anyone give a advice on this one?
I bought some rough cut 2x6 AYC. I used a re-man saw to cut it into 3/4"thick board's. After cutting all my strips I noticed that they are not all 3/4".
anybody have any ideas on how to get them all down to the same widths?
Thanks
Marc Donnelly
Messages In This Thread
- Strip: uneven 3/4" strips
Marc Donnelly -- 7/31/2016, 4:00 pm- Re: Strip: uneven 3/4" strips
Marc Upchurch -- 7/31/2016, 4:45 pm- Re: Strip: uneven 3/4" strips
JohnAbercrombie -- 7/31/2016, 5:21 pm- Re: Strip: uneven 3/4" strips
Marc Donnelly -- 7/31/2016, 5:38 pm- Re: Strip: uneven 3/4" strips
Marc Upchurch -- 7/31/2016, 6:52 pm- Re: Strip: uneven 3/4" strips
Marc Donnelly -- 7/31/2016, 8:19 pm- Re: Strip: uneven 3/4" strips
JohnAbercrombie -- 7/31/2016, 8:45 pm- Re: Strip: uneven 3/4" strips
Marc Upchurch -- 7/31/2016, 9:18 pm- Re: Strip: uneven 3/4" strips
Bill Hamm -- 8/1/2016, 12:09 am
- Re: Strip: uneven 3/4" strips
- Re: Strip: uneven 3/4" strips
- Re: Strip: uneven 3/4" strips
- Re: Strip: uneven 3/4" strips
Jaybabina -- 8/1/2016, 7:52 am - Re: Strip: uneven 3/4" strips
- Re: Strip: uneven 3/4" strips
- Re: Strip: uneven 3/4" strips
- Re: Strip: uneven 3/4" strips