Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Delamination
By:Yoshi
Date: 8/2/2016, 8:49 am
In Response To: Strip: Delamination *PIC* (Shawn jones)

Having used a heat gun to remove all the fiberglass from two boats in the last couple months I would give some thought to just sanding that area down to bare wood. At least on the outside.

Messages In This Thread

Strip: Delamination *PIC*
Shawn jones -- 8/1/2016, 4:10 pm
Re: Strip: Delamination
Rob Macks/Laughing Loon CC&K -- 8/1/2016, 5:03 pm
Re: Strip: Delamination
Shawn jones -- 8/1/2016, 5:44 pm
Re: Strip: Delamination
Rob Macks/Laughing Loon CC&K -- 8/1/2016, 6:53 pm
Re: Strip: Delamination
Marc Upchurch -- 8/1/2016, 5:05 pm
Re: Strip: Delamination
John K -- 8/1/2016, 6:09 pm
Re: Strip: Delamination
Mike Bielski -- 8/1/2016, 10:33 pm
Re: Strip: Delamination
scottbaxter -- 8/2/2016, 12:13 am
Re: Strip: Delamination
jaybabina -- 8/2/2016, 8:31 am
Re: Strip: Delamination
Yoshi -- 8/2/2016, 8:49 am
Re: Strip: Delamination
Nick Schade - Guillemot Kayaks -- 8/2/2016, 9:51 am
Re: Strip: Delamination
Justin -- 8/2/2016, 10:30 am
Re: Strip: Delamination
Sam McFadden -- 8/2/2016, 10:29 am
Re: Strip: Delamination
Shawn Jones -- 8/2/2016, 2:28 pm
Re: Strip: Delamination
Marc Donnelly -- 8/2/2016, 5:20 pm
Re: Strip: Delamination
John VB -- 8/3/2016, 7:01 am
Re: Strip: Delamination
Shawn Jones -- 8/5/2016, 11:46 am