Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Paddle: cupped Euro blades
By:Deano055
Date: 9/1/2016, 4:29 pm
In Response To: Paddle: cupped Euro blades (Peter Patel-Schneider)

I built one with the two way cupping... I jointed boards to make the shaft/paddles.. I then split it down the middle and used my bandsaw tilted to cut the inner and outer of each paddle half (the tilt makes the center to edge curve)... then glued it back together, cut the blade profiles, and then finished it with spokeshaves...

Messages In This Thread

Paddle: cupped Euro blades
Peter Patel-Schneider -- 8/28/2016, 4:30 pm
Re: Paddle: cupped Euro blades
jaybabina -- 8/28/2016, 6:29 pm
Re: Paddle: cupped Euro blades
Ken Blanton -- 8/28/2016, 7:38 pm
Re: Paddle: cupped Euro blades
Robert N Pruden -- 9/2/2016, 8:43 pm
Re: Paddle: cupped Euro blades
Thomas Duncan -- 8/29/2016, 9:45 am
Re: Paddle: cupped Euro blades
Peter Patel-Schneider -- 8/29/2016, 10:32 am
Re: Paddle: cupped Euro blades
Bob Borovicka -- 8/29/2016, 3:52 pm
Re: Paddle: cupped Euro blades
Les Cheeseman -- 8/30/2016, 3:31 pm
Re: Paddle: cupped Euro blades
Deano055 -- 9/1/2016, 4:29 pm