Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Epoxy on shear strip
By:Jesse auger
Date: 9/3/2016, 4:40 pm
In Response To: Re: Strip: Epoxy on shear strip (Thomas Duncan)

I made a few blocks. A 60 grit an 80 grit and a curved one for the coaming. I tried them out and they work great. I also slightly beveled the ends about a half inch to try and keep the sand paper from getting chewed up.
You al give sound advise and I'm grateful. Thank you. -- Jesse

Messages In This Thread

Strip: Epoxy on shear strip
Jesse auger -- 9/2/2016, 12:59 pm
Re: Strip: Epoxy on shear strip
jaybabina -- 9/2/2016, 1:57 pm
Re: Strip: Epoxy on shear strip
Jesse auger -- 9/2/2016, 3:50 pm
Re: Strip: Epoxy on shear strip
jaybabina -- 9/2/2016, 9:14 pm
Re: Strip: Epoxy on shear strip
Jesse auger -- 9/3/2016, 4:31 pm
Re: Strip: Epoxy on shear strip
Nick Schade - Guillemot Kayaks -- 9/2/2016, 4:33 pm
Re: Strip: Epoxy on shear strip
Jesse auger -- 9/2/2016, 4:34 pm
Re: Strip: Epoxy on shear strip
JohnAbercrombie -- 9/2/2016, 5:27 pm
Re: Strip: Epoxy on shear strip
Thomas Duncan -- 9/3/2016, 11:01 am
Re: Strip: Epoxy on shear strip
Jesse auger -- 9/3/2016, 4:40 pm
Re: Strip: Epoxy on shear strip
Tom C -- 9/4/2016, 10:17 am
Re: Strip: Epoxy on shear strip
JohnAbercrombie -- 9/4/2016, 12:27 pm