Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: Preferred sharpening method
By:Mike Bielski
Date: 9/9/2016, 10:36 pm
In Response To: Tools: Preferred sharpening method (Dan Thaler)

I use the Lee Valley Veritas honing guide and 3M abrasive sheets stuck to a piece of float glass. I lubricate it with mineral oil. I sometimes then strop with the Veritas honing compound on a piece of MDF or baltic birch.

m

Messages In This Thread

Tools: Preferred sharpening method
Dan Thaler -- 9/9/2016, 10:30 pm
Re: Tools: Preferred sharpening method
Mike Bielski -- 9/9/2016, 10:36 pm
Re: Tools: Preferred sharpening method
Paul -- 9/9/2016, 11:07 pm
Re: Tools: Preferred sharpening method
Dave ( of Calif.) -- 9/10/2016, 1:29 am
Re: Tools: Preferred sharpening method
Marc Upchurch -- 9/9/2016, 11:32 pm
Re: Tools: Preferred sharpening method
Brian Nystrom -- 9/10/2016, 1:48 am
Re: Tools: Preferred sharpening method
Dan Thaler -- 9/10/2016, 6:56 am
Re: Tools: Preferred sharpening method
Bill Hamm -- 9/11/2016, 12:06 am
Re: Tools: Preferred sharpening method
dave koslow -- 9/12/2016, 2:02 pm
Re: Tools: Preferred sharpening method
Bill Hamm -- 9/14/2016, 7:53 am
Re: Tools: Preferred sharpening method
Etienne Muller -- 9/10/2016, 3:05 am
Re: Tools: Preferred sharpening method *PIC*
Nick Schade - Guillemot Kayaks -- 9/10/2016, 8:00 pm
Re: Tools: Preferred sharpening method
Bill Mayberrt -- 9/11/2016, 3:28 pm
Re: Tools: Preferred sharpening method
Marc Donnelly -- 9/11/2016, 9:22 pm
Re: Tools: Preferred sharpening method
Rob Macks/Laughing Loon CC&K -- 9/12/2016, 3:37 pm