Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Second Fill Coat on Hull
By:Etienne Muller
Date: 10/23/2016, 5:17 am
In Response To: Re: Epoxy: Second Fill Coat on Hull (Marc Upchurch)

For fillccoats I usually pour it out of the cup onto the boat, smoosh it around (I think that is the technical term) with a soft squeegee, even it out with a west foam roller, and tip it off with a brush.

I use the Oxford comma.

Et

Messages In This Thread

Epoxy: Second Fill Coat on Hull
Wesley -- 10/22/2016, 2:23 pm
Re: Epoxy: Second Fill Coat on Hull
Marc Upchurch -- 10/22/2016, 7:46 pm
Re: Epoxy: Second Fill Coat on Hull
Etienne Muller -- 10/23/2016, 5:17 am
Re: Epoxy: Second Fill Coat on Hull
Marc Upchurch -- 10/23/2016, 9:44 am
Re: Epoxy: Second Fill Coat on Hull
Etienne Muller -- 10/23/2016, 11:18 am
Re: Epoxy: Second Fill Coat on Hull
Marc Upchurch -- 10/23/2016, 11:27 am
Re: Epoxy: Second Fill Coat on Hull
scottbaxter -- 10/23/2016, 2:04 pm
Re: Epoxy: Second Fill Coat on Hull
Dan Thaler -- 10/23/2016, 5:44 pm
Re: Epoxy: Second Fill Coat on Hull
JohnAbercrombie -- 10/23/2016, 6:36 pm
Re: Epoxy: Second Fill Coat on Hull
Dan Thaler -- 10/23/2016, 6:49 pm
Re: Epoxy: Second Fill Coat on Hull
JohnAbercrombie -- 10/23/2016, 7:02 pm
Re: Epoxy: Second Fill Coat on Hull
upchurchmr -- 10/23/2016, 6:53 pm
Re: Epoxy: Second Fill Coat on Hull
Dan Thaler -- 10/23/2016, 7:00 pm
Re: Epoxy: Second Fill Coat on Hull
JohnAbercrombie -- 10/23/2016, 7:00 pm
Re: Epoxy: Second Fill Coat on Hull
scottbaxter -- 10/23/2016, 10:32 pm
Re: Epoxy: Second Fill Coat on Hull
Bill Hamm -- 10/23/2016, 11:39 pm
Re: Epoxy: Second Fill Coat on Hull
Bob Borovicka -- 10/24/2016, 6:25 am
Re: Epoxy: Second Fill Coat on Hull
upchurchmr -- 10/23/2016, 6:48 pm
Re: Epoxy: Second Fill Coat on Hull
Rob Macks/Laughing Loon CC&K -- 10/23/2016, 8:21 pm
Re: Epoxy: Second Fill Coat on Hull
Dan Caouette (CSCWC) -- 10/24/2016, 10:50 am
Re: Epoxy: Second Fill Coat on Hull *PIC*
JohnAbercrombie -- 10/24/2016, 1:19 pm
Re: Epoxy: Second Fill Coat on Hull
Etienne Muller -- 10/24/2016, 2:47 pm
Re: Epoxy: Second Fill Coat on Hull
JohnAbercrombie -- 10/24/2016, 1:27 pm
Re: Epoxy: Chip Brushes
Marc Upchurch -- 10/24/2016, 4:07 pm
Re: Epoxy: Second Fill Coat on Hull
Bill Hamm -- 10/25/2016, 12:20 am
Re: Epoxy: Second Fill Coat on Hull
Bill Hamm -- 10/25/2016, 12:29 am
Re: Epoxy: Second Fill Coat on Hull
Etienne Muller -- 10/25/2016, 3:48 am
Re: Epoxy: Second Fill Coat on Hull
Bill Hamm -- 10/25/2016, 6:12 am
Re: Epoxy: Second Fill Coat on Hull
dave koslow -- 10/25/2016, 1:04 pm
Re: Epoxy: Loose Bristles
Nick Schade - Guillemot Kayaks -- 10/25/2016, 9:26 am
Re: Epoxy: Loose Bristles
Wesley -- 11/18/2016, 1:05 pm