Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Plate development
By:upchurchmr
Date: 12/6/2016, 11:04 am
In Response To: Re: S&G: Plate development (Hubert Schreier)

I'd suggest you get the plans from a known plywood boat and see if you can reproduce the results with your code.
There should be serious doubts as evidenced by the "small radius curvature" generated.

Nothing I've seen in practice approaches your lines, but most of my work was on aircraft and not with plywood.

When I suggested you check your results I was not speaking of analytically.

I'll leave you alone now.

Messages In This Thread

S&G: Plate development
Hubert Schreier -- 12/3/2016, 4:10 pm
Re: S&G: Plate development
upchurchmr -- 12/3/2016, 4:38 pm
Re: S&G: Plate development
Hubert Schreier -- 12/3/2016, 4:55 pm
Re: S&G: Plate development
upchurchmr -- 12/3/2016, 5:45 pm
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/3/2016, 10:14 pm
Re: S&G: Plate development
Hubert Schreier -- 12/4/2016, 12:57 am
Re: S&G: Plate development
upchurchmr -- 12/4/2016, 3:37 am
Re: S&G: Plate development
Hubert Schreier -- 12/4/2016, 11:45 pm
Re: S&G: Plate development
Alex Ferguson -- 12/5/2016, 3:38 pm
Re: S&G: Plate development
upchurchmr -- 12/5/2016, 5:42 pm
Re: S&G: Plate development
Hubert Schreier -- 12/5/2016, 9:23 pm
Re: S&G: Plate development
Alex Ferguson -- 12/5/2016, 9:55 pm
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 12:34 am
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/4/2016, 8:20 am
Re: S&G: Plate development *PIC*
Hubert Schreier -- 12/5/2016, 10:23 pm
Re: S&G: Plate development
Bill Hamm -- 12/6/2016, 12:56 am
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 1:03 am
Re: S&G: Plate development
Bill Hamm -- 12/6/2016, 1:09 am
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 1:20 am
Re: S&G: Plate development
Mike Bielski -- 12/6/2016, 1:09 pm
Re: S&G: Plate development *PIC*
Hubert Schreier -- 12/6/2016, 3:07 pm
Re: S&G: Plate development
Mike Bielski -- 12/6/2016, 4:35 pm
Re: S&G: Plate development
upchurchmr -- 12/6/2016, 7:14 am
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 8:45 am
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/6/2016, 8:49 am
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 10:04 am
Re: S&G: Plate development
upchurchmr -- 12/6/2016, 11:04 am
Re: S&G: Plate development *PIC*
Nick Schade - Guillemot Kayaks -- 12/6/2016, 7:29 pm
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 8:26 pm
Re: S&G: Plate development *PIC*
Hubert Schreier -- 12/7/2016, 12:27 am
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/7/2016, 7:45 am
Re: S&G: Plate development
upchurchmr -- 12/7/2016, 9:29 am
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/7/2016, 10:21 am
Re: S&G: Plate development
upchurchmr -- 12/7/2016, 12:43 pm
Re: S&G: Plate development *PIC*
Hubert Schreier -- 12/13/2016, 4:00 am
Re: S&G: Plate development *PIC*
Nick Schade - Guillemot Kayaks -- 12/13/2016, 6:54 pm
Re: S&G: Plate development
Hubert Schreier -- 12/13/2016, 8:03 pm
Re: S&G: Plate development *PIC*
Nick Schade - Guillemot Kayaks -- 12/13/2016, 11:10 pm
Re: S&G: Plate development
Hubert Schreier -- 12/30/2016, 6:08 pm
Re: S&G: Plate development *PIC*
Dan Caouette (CSCWC) -- 12/14/2016, 6:55 am
Delftship
Nick Schade - Guillemot Kayaks -- 12/14/2016, 8:50 am
Re: Delftship *PIC*
Dan Caouette (CSCWC) -- 12/14/2016, 11:57 am
Re: Delftship
Nick Schade - Guillemot Kayaks -- 1/25/2017, 9:41 am
Re: Delftship
Dan Caouette (CSCWC) -- 1/25/2017, 6:19 pm
Re: S&G: Plate development
Hubert Schreier -- 12/30/2016, 5:53 pm
Re: S&G: Plate development
Dan Caouette (CSCWC) -- 12/31/2016, 8:57 am
Find "MultiConic Dev of Hull Surfaces"
mick allen -- 12/5/2016, 8:16 pm
Re: Find "MultiConic Dev of Hull Surfaces"
Hubert Schreier -- 12/5/2016, 11:07 pm