Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Plate development
By:Mike Bielski
Date: 12/6/2016, 1:09 pm
In Response To: Re: S&G: Plate development (Hubert Schreier)

I am neither a math nor CAD expert, but I can say that you will not find any plywood that will conform to the shape in that diagram. You will have to add another chine or- can't say what- but from a materials standpoint that shape is not possible with plywood.

Consider finding a plywood supplier and using either 1/8" baltic birch or 1/8" certified underlayment luan.

m

Messages In This Thread

S&G: Plate development
Hubert Schreier -- 12/3/2016, 4:10 pm
Re: S&G: Plate development
upchurchmr -- 12/3/2016, 4:38 pm
Re: S&G: Plate development
Hubert Schreier -- 12/3/2016, 4:55 pm
Re: S&G: Plate development
upchurchmr -- 12/3/2016, 5:45 pm
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/3/2016, 10:14 pm
Re: S&G: Plate development
Hubert Schreier -- 12/4/2016, 12:57 am
Re: S&G: Plate development
upchurchmr -- 12/4/2016, 3:37 am
Re: S&G: Plate development
Hubert Schreier -- 12/4/2016, 11:45 pm
Re: S&G: Plate development
Alex Ferguson -- 12/5/2016, 3:38 pm
Re: S&G: Plate development
upchurchmr -- 12/5/2016, 5:42 pm
Re: S&G: Plate development
Hubert Schreier -- 12/5/2016, 9:23 pm
Re: S&G: Plate development
Alex Ferguson -- 12/5/2016, 9:55 pm
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 12:34 am
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/4/2016, 8:20 am
Re: S&G: Plate development *PIC*
Hubert Schreier -- 12/5/2016, 10:23 pm
Re: S&G: Plate development
Bill Hamm -- 12/6/2016, 12:56 am
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 1:03 am
Re: S&G: Plate development
Bill Hamm -- 12/6/2016, 1:09 am
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 1:20 am
Re: S&G: Plate development
Mike Bielski -- 12/6/2016, 1:09 pm
Re: S&G: Plate development *PIC*
Hubert Schreier -- 12/6/2016, 3:07 pm
Re: S&G: Plate development
Mike Bielski -- 12/6/2016, 4:35 pm
Re: S&G: Plate development
upchurchmr -- 12/6/2016, 7:14 am
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 8:45 am
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/6/2016, 8:49 am
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 10:04 am
Re: S&G: Plate development
upchurchmr -- 12/6/2016, 11:04 am
Re: S&G: Plate development *PIC*
Nick Schade - Guillemot Kayaks -- 12/6/2016, 7:29 pm
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 8:26 pm
Re: S&G: Plate development *PIC*
Hubert Schreier -- 12/7/2016, 12:27 am
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/7/2016, 7:45 am
Re: S&G: Plate development
upchurchmr -- 12/7/2016, 9:29 am
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/7/2016, 10:21 am
Re: S&G: Plate development
upchurchmr -- 12/7/2016, 12:43 pm
Re: S&G: Plate development *PIC*
Hubert Schreier -- 12/13/2016, 4:00 am
Re: S&G: Plate development *PIC*
Nick Schade - Guillemot Kayaks -- 12/13/2016, 6:54 pm
Re: S&G: Plate development
Hubert Schreier -- 12/13/2016, 8:03 pm
Re: S&G: Plate development *PIC*
Nick Schade - Guillemot Kayaks -- 12/13/2016, 11:10 pm
Re: S&G: Plate development
Hubert Schreier -- 12/30/2016, 6:08 pm
Re: S&G: Plate development *PIC*
Dan Caouette (CSCWC) -- 12/14/2016, 6:55 am
Delftship
Nick Schade - Guillemot Kayaks -- 12/14/2016, 8:50 am
Re: Delftship *PIC*
Dan Caouette (CSCWC) -- 12/14/2016, 11:57 am
Re: Delftship
Nick Schade - Guillemot Kayaks -- 1/25/2017, 9:41 am
Re: Delftship
Dan Caouette (CSCWC) -- 1/25/2017, 6:19 pm
Re: S&G: Plate development
Hubert Schreier -- 12/30/2016, 5:53 pm
Re: S&G: Plate development
Dan Caouette (CSCWC) -- 12/31/2016, 8:57 am
Find "MultiConic Dev of Hull Surfaces"
mick allen -- 12/5/2016, 8:16 pm
Re: Find "MultiConic Dev of Hull Surfaces"
Hubert Schreier -- 12/5/2016, 11:07 pm