Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Plate development
By:upchurchmr
Date: 12/7/2016, 12:43 pm
In Response To: Re: S&G: Plate development (Nick Schade - Guillemot Kayaks)

A FEM development is clearly overkill for such a lightly loaded boat.
My only point is that without experience and judgement, an analytical approach can have limitations.

Nurbs are endlessly capable of creating extremely complex surfaces, but do not offer the ability to limit the surface with in plane stiffness.

A surface with less complexity potential would actually be more appropriate.

There are a large number of existing boats which are successful plywood development which I assume did not require a through analysis approach.

You have clearly shown the attention to detail necessary to get a surface that closely approximates what results in practice.

Messages In This Thread

S&G: Plate development
Hubert Schreier -- 12/3/2016, 4:10 pm
Re: S&G: Plate development
upchurchmr -- 12/3/2016, 4:38 pm
Re: S&G: Plate development
Hubert Schreier -- 12/3/2016, 4:55 pm
Re: S&G: Plate development
upchurchmr -- 12/3/2016, 5:45 pm
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/3/2016, 10:14 pm
Re: S&G: Plate development
Hubert Schreier -- 12/4/2016, 12:57 am
Re: S&G: Plate development
upchurchmr -- 12/4/2016, 3:37 am
Re: S&G: Plate development
Hubert Schreier -- 12/4/2016, 11:45 pm
Re: S&G: Plate development
Alex Ferguson -- 12/5/2016, 3:38 pm
Re: S&G: Plate development
upchurchmr -- 12/5/2016, 5:42 pm
Re: S&G: Plate development
Hubert Schreier -- 12/5/2016, 9:23 pm
Re: S&G: Plate development
Alex Ferguson -- 12/5/2016, 9:55 pm
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 12:34 am
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/4/2016, 8:20 am
Re: S&G: Plate development *PIC*
Hubert Schreier -- 12/5/2016, 10:23 pm
Re: S&G: Plate development
Bill Hamm -- 12/6/2016, 12:56 am
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 1:03 am
Re: S&G: Plate development
Bill Hamm -- 12/6/2016, 1:09 am
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 1:20 am
Re: S&G: Plate development
Mike Bielski -- 12/6/2016, 1:09 pm
Re: S&G: Plate development *PIC*
Hubert Schreier -- 12/6/2016, 3:07 pm
Re: S&G: Plate development
Mike Bielski -- 12/6/2016, 4:35 pm
Re: S&G: Plate development
upchurchmr -- 12/6/2016, 7:14 am
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 8:45 am
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/6/2016, 8:49 am
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 10:04 am
Re: S&G: Plate development
upchurchmr -- 12/6/2016, 11:04 am
Re: S&G: Plate development *PIC*
Nick Schade - Guillemot Kayaks -- 12/6/2016, 7:29 pm
Re: S&G: Plate development
Hubert Schreier -- 12/6/2016, 8:26 pm
Re: S&G: Plate development *PIC*
Hubert Schreier -- 12/7/2016, 12:27 am
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/7/2016, 7:45 am
Re: S&G: Plate development
upchurchmr -- 12/7/2016, 9:29 am
Re: S&G: Plate development
Nick Schade - Guillemot Kayaks -- 12/7/2016, 10:21 am
Re: S&G: Plate development
upchurchmr -- 12/7/2016, 12:43 pm
Re: S&G: Plate development *PIC*
Hubert Schreier -- 12/13/2016, 4:00 am
Re: S&G: Plate development *PIC*
Nick Schade - Guillemot Kayaks -- 12/13/2016, 6:54 pm
Re: S&G: Plate development
Hubert Schreier -- 12/13/2016, 8:03 pm
Re: S&G: Plate development *PIC*
Nick Schade - Guillemot Kayaks -- 12/13/2016, 11:10 pm
Re: S&G: Plate development
Hubert Schreier -- 12/30/2016, 6:08 pm
Re: S&G: Plate development *PIC*
Dan Caouette (CSCWC) -- 12/14/2016, 6:55 am
Delftship
Nick Schade - Guillemot Kayaks -- 12/14/2016, 8:50 am
Re: Delftship *PIC*
Dan Caouette (CSCWC) -- 12/14/2016, 11:57 am
Re: Delftship
Nick Schade - Guillemot Kayaks -- 1/25/2017, 9:41 am
Re: Delftship
Dan Caouette (CSCWC) -- 1/25/2017, 6:19 pm
Re: S&G: Plate development
Hubert Schreier -- 12/30/2016, 5:53 pm
Re: S&G: Plate development
Dan Caouette (CSCWC) -- 12/31/2016, 8:57 am
Find "MultiConic Dev of Hull Surfaces"
mick allen -- 12/5/2016, 8:16 pm
Re: Find "MultiConic Dev of Hull Surfaces"
Hubert Schreier -- 12/5/2016, 11:07 pm