Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Cape Ann Storm Deck Modifications *PIC*
By:Etienne Muller
Date: 12/8/2016, 9:03 am
In Response To: Re: Strip: Cape Ann Storm Deck Modifications (Rich D)

I left the deck camber alone. I just added an inch to the height of the front deck formers and the stem piece. From about the thigh I curved the sheer strip so that it ran into the original deck height for the rear deck. I just ran it past the middle two formers, which were also over high, and marked them at the strip so I could reduce them appropriately.

I did this for the POLEDANCER. You can make it out in the photo.

Et

Messages In This Thread

Strip: Cape Ann Storm Deck Modifications
Rich D -- 12/5/2016, 10:01 am
Re: Strip: Cape Ann Storm Deck Modifications
Bill Hamm -- 12/6/2016, 12:44 am
Re: Strip: Cape Ann Storm Deck Modifications
Paul Sylvester -- 12/6/2016, 5:39 am
Re: Strip: Cape Ann Storm Deck Modifications
Mike Bielski -- 12/6/2016, 1:05 pm
Re: Strip: Cape Ann Storm Deck Modifications
Rich D -- 12/6/2016, 2:15 pm
Re: Strip: Cape Ann Storm Deck Modifications
Etienne Muller -- 12/6/2016, 2:28 pm
Re: Strip: Cape Ann Storm Deck Modifications
Rich D -- 12/8/2016, 6:53 am
Re: Strip: Cape Ann Storm Deck Modifications *PIC*
Etienne Muller -- 12/8/2016, 9:03 am
Re: Strip: Cape Ann Storm Deck Modifications *PIC*
Etienne Muller -- 12/8/2016, 9:04 am
Re: Strip: Cape Ann Storm Deck Modifications *PIC*
Etienne Muller -- 12/8/2016, 9:11 am
Re: Strip: Cape Ann Storm Deck Modifications
Mike Bielski -- 12/8/2016, 7:57 pm
Re: Strip: Cape Ann Storm Deck Modifications
JohnAbercrombie -- 12/8/2016, 10:20 am