Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Using a roller for automotive clear
By:Mike Bielski
Date: 12/31/2016, 8:51 pm
In Response To: Material: Using a roller for automotive clear (Paul T)

Catalyzed finishes are pretty fussy. Their ratios of product/catalyst/solvent are set up for spraying. I don't know that the viscosity would work out for any other application. It's very expensive stuff. I wouldn't want to experiment with it on my nickel.

m

Messages In This Thread

Material: Using a roller for automotive clear
Paul T -- 12/31/2016, 5:20 pm
Re: Material: Using a roller for automotive clear
Marc Upchurch -- 12/31/2016, 7:07 pm
Re: Material: Using a roller for automotive clear
Mike Bielski -- 12/31/2016, 8:51 pm
Re: Material: Using a roller for automotive clear
Paul T -- 12/31/2016, 9:06 pm
Re: Material: Using a roller for automotive clear
Mike Bielski -- 1/1/2017, 9:53 am
Re: Material: Using a roller for automotive clear
JohnAbercrombie -- 1/1/2017, 10:19 am
Re: Material: Using a roller for automotive clear
Dan Caouette (CSCWC) -- 1/1/2017, 12:42 pm
Re: Material: Using a roller for automotive clear
Nick R. -- 1/1/2017, 2:41 pm
Re: Material: Using a roller for automotive clear
Marc Upchurch -- 1/1/2017, 2:43 pm
Re: Material: Using a roller for automotive clear
Paul T -- 1/1/2017, 6:36 pm
Re: Material: Using a roller for automotive clear
Paul T -- 1/1/2017, 6:43 pm
Re: Material: Using a roller for automotive clear *PIC*
Paul T -- 1/4/2017, 8:12 pm
Re: Material: Using a roller for automotive clear
Bill Hamm -- 1/6/2017, 3:14 am
Re: Material: Using a roller for automotive clear
Marc Upchurch -- 1/6/2017, 6:46 am
Re: Material: Using a roller for automotive clear *PIC*
Paul T -- 1/6/2017, 7:25 am
Re: Material: Using a roller for automotive clear
Dan Caouette (CSCWC) -- 1/6/2017, 10:02 am
Re: Material: Using a roller for automotive clear
Marc Upchurch -- 1/6/2017, 11:04 am
Re: Material: Using a roller for automotive clear
Roy Martin -- 1/6/2017, 11:35 am
Re: Material: Using a roller for automotive clear
Paul T -- 1/6/2017, 12:54 pm
Re: Material: Using a roller for automotive clear
Paul T -- 1/6/2017, 12:41 pm